Firewire - How to

Link to this post 22 Dec 10

Can anyone explainme how to configure the firewire port on my ACER laptop so that I can attach my T.C. Electronic Desktop Konnekt 6 and use it to create a DAW with this machine?

Thanks in advance

Link to this post 22 Dec 10

Firewire drivers are already present in the kernel. Maybe you would like to restate your question with a lot more info. What exactly are you trying to do and specifically what hardware is on your Acer laptop.

Link to this post 23 Dec 10

I don't know way you need to configure your firewall for what assumes to be a hardware device. Please explain in more detail what you are trying to accomplish.

Link to this post 06 Jan 11

My laptop is an old Acer Aspire 3020 with built-in firewire port. I have installed and running Ubuntu Studio 10.10. I also installed jack , ffado-mixer-qt4 - ffado tools - ffado-bus-server - jackd2-firewire libffado2.

I have also added this line, RAW 1394, on etc/modules so this should load 1394 in the kernel.
Sudo modprobe RAW1394 gives no reply (is this correct)

Still my soundcard is not recognized . It's a T.C. Electronic Desktop Konnekt 6 which it's supposed to work under ffado.

What else do you need to get me on the right way to configure everything so that I can hear music with this machine?

Thanks in advance to all

Link to this post 07 Jan 11

Hmm, normally I would expect it to be auto recognized. Do USB devices get recognized when plugged in? Even like USB keyboards or mice?

Ubuntu should have support for hotplug already. Let us know if USB devices work so we can narrow it down to a firewire issue or a system issue.

Link to this post 07 Jan 11

yes all usb devices are recognized. either usb sticks .. and even a usb plantronics headset (with micro) which was more difficult to get if fully recognized. usb mice are working ok ..


Who we are ?

The Linux Foundation is a non-profit consortium dedicated to the growth of Linux.

More About the foundation...

Frequent Questions

Linux Training / Board

/** BC-056 Ameex changes to add tracking code - 2016-01-22 **/ ?>