Linux.com

Home Linux Community Forums Hardware Multimedia JMTek HY554 USB Sound device - Cant get it to work

JMTek HY554 USB Sound device - Cant get it to work

Link to this post 17 Jul 09

Hello,

I using Mandriva 2009.0 on my laptop.
I bought a "USB 3D sound" usb device off eBay and am trying to get it to work.

At the moment, i have the usb device plugged in and it appears
in lsusb and i have the snd-usb-audio module loaded. When i
go to drakconf and check the hardware that is detected, the
internal soundcard (a realtek) appears in the soundcard section
and looks fine. the usb device appears in the USB sound devices
section and appears fine, but at the bottom in the "Unknown/Others"
section the usb device appears again. When i go to sounds options,
it only shows the internal soundcard. If i go to preferences in the
volume control, to select the output device, it has the realtek card
listed twice, as the snd_hda_intel and the reatek AC880 but no usb device.

Does anyone have any advise?
I can run any commands ye need or upload pics to help.

[root@valhalla cdoyle]$ lsusb
....
Bus 006 Device 006: ID 0c76:1605 JMTek, LLC.
....

[root@valhalla cdoyle]$ lsmod | grep snd_usb_audio
snd_usb_audio 83840 0
snd_usb_lib 19456 1 snd_usb_audio
snd_hwdep 10884 2 snd_usb_audio,snd_hda_intel
snd_pcm 72836 2 snd_usb_audio,snd_hda_intel
snd 52772 8 snd_usb_audio,snd_rawmidi,snd_seq_device,snd_hda_intel,snd_hwdep,snd_pcm,snd_timer,snd_mixer_oss
usbcore 137200 7 snd_usb_audio,snd_usb_lib,usbhid,uhci_hcd,ohci_hcd,ehci_hcd [file name=drakconf.jpg size=44848]http://www.linux.com/media/kunena/attachments/legacy/files/drakconf.jpg[/file]

Link to this post 02 Nov 09

Have you tried using pulseaudio to configure your sound devices? I found that very easy to use.

Who we are ?

The Linux Foundation is a non-profit consortium dedicated to the growth of Linux.

More About the foundation...

Frequent Questions

Join / Linux Training / Board