Linux.com

shobin

shobin

  • Linux.com Member
  • Posts: 5
  • Member Since: 17 Feb 12
  • Last Logged In: 19 Apr 12

Latest Posts

Posted by
Topic
Post Preview
Posted
  • shobin
    camera sensor module
    hi all, I am working on leopard board dm355,in that we are using mt9t111 camera sensor.we already have a code for mt9t031.I want to know, code for mt9t031 can be working on mt9t111 is possible or not?also what are the difference b/w mt9t031 and mt9t111? please send me the reply immediately...:(
    Link to this post 06 Apr 12

    hi all,
    I am working on leopard board dm355,in that we are using mt9t111 camera sensor.we already have a code for mt9t031.I want to know, code for mt9t031 can be working on mt9t111 is possible or not?also what are the difference b/w mt9t031 and mt9t111?

    please send me the reply immediately...:(

  • shobin
    kernel error problem
    hi all, I am using leopard board dm355,when i compiling the following error will occured, Welcome to minicom 2.5 OPTIONS: I18n Compiled on May 2 2011, 00:39:27. Port /dev/ttyS0 Press CTRL-A Z for help on special keys Chip initialization passed! TI UBL Version: 1.30 Booting Catalog Boot Loader BootMode = NAND Starting NAND Copy... Valid MagicNum found. DONE Jumping to entry point at 0x81080000. U-Boot 1.2.0 (Feb 24 2010 - 11:46:45)LEOPARD-1.0.0 DRAM: 128 MB NAND: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,) Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 nand_read_bbt: Bad block at 0x00ae0000 256 MiB In: serial Out: serial Err: serial ARM Clock :- 216MHz DDR Clock :- 171MHz Hit any key to stop autoboot: 0 NAND read: device 0 offset 0x1000000, size 0x800000 8388608 bytes read: OK Loading from NAND 256MiB 3,3V 8-bit, offset 0x400000 Image Name: Linux-2.6.10_mvl401_IPNC-1.1.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1490704 Bytes = 1.4 MB Load Address: 80008000 Entry Point: 80008000 ## Booting image at 80700000 ... Image Name: Linux-2.6.10_mvl401_IPNC-1.1.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1490704 Bytes = 1.4 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK Starting kernel ... Linux version 2.6.10_mvl401_IPNC-1.1.0 (leon@localhost.localdomain) (gcc versio9 CPU: ARM926EJ-Sid(wb) [41069265] revision 5 (ARMv5TEJ) CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Machine: DaVinci DM355 IPNetCam Memory policy: ECC disabled, Data cache writeback DM0350 Built 1 zonelists Kernel command line: mem=80M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x1 PID hash table entries: 512 (order: 9, 8192 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 80MB = 80MB total Memory: 69504KB available (2596K code, 589K data, 160K init) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok spawn_desched_task(00000000) desched cpu_callback 3/00000000 ksoftirqd started up. desched cpu_callback 2/00000000 checking if image is initramfs...desched thread 0 started up. it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 8192K NET: Registered protocol family 16 Registering platform device 'serial8250.0'. Parent at platform Registering platform device 'nand_davinci.0'. Parent at platform Registering platform device 'dm9000.0'. Parent at platform Registering platform device 'mmc.0'. Parent at platform DaVinci I2C DEBUG: 20:20:50 Mar 9 2009 Registering platform device 'i2c'. Parent at platform SCSI subsystem initialized Registering platform device 'dm_spi.0'. Parent at platform NetWinder Floating Point Emulator V0.97 (double precision) JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. yaffs Mar 9 2009 20:20:27 Installing. Initializing Cryptographic API Registering platform device 'dm355fb.0'. Parent at platform Console: switching to colour frame buffer device 90x30 watchdog: TI DaVinci Watchdog Timer: timer margin 64 sec DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected DaVinci I2C WARNING: i2c: NACK detected DaVinci I2C WARNING: i2c: RAR detected Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Registering platform device 'serial8250'. Parent at platform ttyS0 at MMIO 0x1c20000 (irq = 40) is a 16550A ttyS1 at MMIO 0x1c20400 (irq = 41) is a 16550A ttyS2 at MMIO 0x1e06000 (irq = 14) is a 16550A io scheduler noop registered io scheduler anticipatory registered RAMDISK driver initialized: 1 RAM disks of 32768K size 1024 blocksize loop: loaded (max 8 devices) dm9000 Ethernet Driver dm9000: read chip_revision 0x00000019 Getting MAC from env var 'ethaddr'.. eth0: dm9000 at c5860000,c5862010 IRQ 53 MAC: 00:0c:0c:a0:00:89 i2c /dev entries driver Linux video capture interface: v1.00 Registering platform device 'vpfe.1'. Parent at platform vpfe vpfe.1: DaVinci v4l2 capture driver V1.0 loaded ipipe major#: 254, minor# 0 Registering platform device 'dm355_ipipe.2'. Parent at platform ipipe driver registered aew major#: 253, minor# 0 Registering platform device 'dm355_aew.2'. Parent at platform elevator: using anticipatory as default io scheduler nand_davinci nand_davinci.0: Using 4-bit hardware ECC NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bi) Creating 5 MTD partitions on "nand_davinci.0": 0x00000000-0x00060000 : "bootloader" 0x00060000-0x00200000 : "params" 0x00200000-0x00400000 : "kernel" 0x00400000-0x01800000 : "filesystem" 0x01800000-0x10000000 : "data" nand_davinci nand_davinci.0: hardware revision: 2.3 drivers/spi/spi.c:scan_boardinfo:304 modias AIC26 irq 0 max_speed 2000000 bus_num 65535 chip_select 0 mode 0 dm_spi.0: dm355 SPI Controller driver at 0xc5864000 (irq = 42) mmc mmc.0: Supporting 4-bit mode mmc mmc.0: Using DMA mode Registering platform device 'davinci-audio.0'. Parent at platform MMC cmd.resp[0] = aa orc=0 MMC cmd.resp[0] = aa orc=300000 MMC: selected 50.000MHz transfer rate MMC: selected 50.000MHz transfer rate mmcblk0: mmc0:b368 LEXAR 3914752KiB NET: Registered protocol family 2 mmcblk0: p1 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 i=409 Speed=100 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Sending DHCP requests ., OK IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.1.20 IP-Config: Complete: device=eth0, addr=192.168.1.20, mask=255.255.255.0, gw=192.168.1.1, host=192.168.1.20, domain=, nis-domain=(none), bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Freeing init memory: 160K INIT: version 2.85 booting 0 mknod: /dev/ptmx: File exists Mounting a tmpfs over /dev...done. Creating initial device nodes...done. 0 Mounting local filesystems: mount none on /dev/shm type tmpfs (rw,size=5M) none on /var/run type tmpfs (rw) none on /tmp type tmpfs (rw,sync) Starting hotplug subsystem: pci pci [success] usb usb [success] isapnp isapnp [success] ide ide [success] input input [success] scsi scsi [success] done. Starting portmap daemon: portmap/etc/rc.d/rcS.d/S41portmap: 156: nice: not found pidof: invalid option -- x BusyBox v1.01 (2005.12.18-04:57+0000) multi-call binary No help available. . ioremap_nocache(0x85000000, 50331648)=0xc5880000 allocated heap buffer 0xc5880000 of size 0x26c000 cmem initialized 13 pools between 0x85000000 and 0x88000000 sbulla: unknown partition table musb_hdrc: version 2.2a/db-0.4.8 [cppi-dma] [peripheral] [debug=0] Registering platform device 'musb_hdrc'. Parent at platform musb_hdrc: USB Peripheral mode controller at c5866000 using DMA, IRQ 12 mkdosfs 2.11 (12 Mar 2005) /dev/sbulla has 4 heads and 16 sectors per track, logical sector size is 512, using 0xf8 media descriptor, with 1024 sectors; file system has 2 12-bit FATs and 4 sectors per cluster. FAT size is 1 sector, and provides 247 clusters. Root directory contains 512 slots. Volume ID is 32c7064e, no volume label. ECC_STATE_TOO_MANY_ERRS mtd->read(0x400 bytes from 0xdba0000) returned ECC error ECC_STATE_TOO_MANY_ERRS mtd->read(0x44 bytes from 0xdba077c) returned ECC error jffs2_get_inode_nodes(): Data CRC failed on node at 0x0dba077c: Read 0xf1a4b34dd ECC_STATE_TOO_MANY_ERRS mtd->read(0x44 bytes from 0xdba0738) returned ECC error ECC_STATE_TOO_MANY_ERRS mtd->read(0x44 bytes from 0xdba0684) returned ECC error Creat queue id:0 queue id:0 Creat queue id:32769 queue id:32769 IPNC-1.1.0 (leon@localhost.localdomain) (gcc version 3.4.3 (MontaVista Creat queue id:65538 queue id:65538 queue id:32769 Error: Invalid Semaphore handler Error: Invalid Semaphore handler queue id:65538 ApproDrvInit: 3 Creat queue id:98307 queue id:98307 umount: /mnt/mmc: Invalid argument FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev mmcblk0. FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev mmcblk0. yaffs: dev is 266338304 name is "mmcblk0" yaffs: Attempting MTD mount on 254.0, "mmcblk0" yaffs: dev is 266338304 name is "mmcblk0" yaffs: Attempting MTD mount on 254.0, "mmcblk0" mount: you must specify the filesystem type Error: Invalid Semaphore handler Error: Invalid Semaphore handler killall: dhcpcd: no process killed rm: cannot remove `/var/run/dhcpcd-eth0.pid': No such file or directory net_search_gateway:eth0, 1A8C0, 0, 1 dns=192.168.1.1 nVideocodecmode = 0 nVideocodecres = 0 ./encode_stream -u 4 -q 50 -d -r 1280x720 -e 352x192 -w 640x352 -b 4000000 -m 1& SendAlarmResetTrigger CVBR Encode demo started. 720P MODE fixInfo.line_length = 1440 varInfo.yres_virtual = 1728 queue id:98307 vpfe vpfe.1: Validation pass queue id:65538 queue id:32769 CPU MIPS = 107.720001 CPU is 216Mhz bit_rate_ctrl = 1 CPU CurrentStatus is = 0 CPU CurrentStatus is = 0 bit_rate_ctrl = 1 CPU CurrentStatus is = 0 IPNC-1.1.0 (leon@locdavinci-McBSP: McBSP2 io_base: 0xe1204000 alhost.localdomain) (gcc version 3.4.3 (MontaVista Blocksize: 2048 encode_buffer size= 16384 queue id:0 queue id:32769 IPNC-1.1.0 (leon@localhost.localdomain) (gcc version 3.4.3 (MontaVista Check_AutoIris: 1 Appro XDM Aew_Cal_read_parameter !! MOTION_STREAM1 IsMotionOn = 0 CPU CurrentStatus is = 0 SendAlarmResetTrigger APPRO AEW TRIAL VERSION !!! APPRO AEW DATE LINE 2009/6 MOTION_STREAM2 IsMotionOn = 0 CPU CurrentStatus is = 0 ApproDrvInit: 7 queue id:98307 net_search_gateway:eth0, 1A8C0, 0, 1 net_search_gateway:eth0, 0, FE01A8C0, 3 dns=192.168.1.1 SendAlarmResetTrigger rmmod: g_file_storage.ko: No such file or directory g_file_storage gadget: File-backed Storage Gadget, version: 20 October 2004 g_file_storage gadget: Number of LUNs=1 g_file_storage gadget-lun0: ro=0, file: /dev/sbulla usb connect SendAlarmResetTrigger g_file_storage gadget: high speed config #1 SendAlarmResetTrigger SendAlarmResetTrigger ApproDrvInit: 6 queue id:98307 ApproDrvInit: 2 queue id:98307 Initializing... ...done initializing Play this stream using the URL: rtsp://192.168.1.168/mpeg4 Initializing... ...done initializing Play this stream using the URL: rtsp://192.168.1.168:8554/mpeg4 SendAlarmResetTrigger Audio disabled! Audio disabled! [30/Dec/1996:00:01:23 +0000] boa: server version Boa/0.94.13 [30/Dec/1996:00:01:23 +0000] boa: server built Feb 10 2009 at 00:06:03. [30/Dec/1996:00:01:23 +0000] boa: starting server pid=1010, port 80 INIT: Entering runlevel: 3 SendAlarmResetTrigger queue id:0 UDPString=uuid:Upnp-TVEmulator-1_0-00_0040771948 Upnp port is 0 UPnP Initialized OK ip=192.168.1.168, port=49152 desc_doc_url = http://192.168.1.168/tvdevicedesc.xml error code = 0 Starting internet superserver: inetd. SendAlarmResetTrigger device advertisement succeed. SendAlarmResetTrigger MontaVista(R) Linux(R) Professional Edition 4.0.1 (0502020) 192.168.1.20 login: SendAlarmResetTrigger SendAlarmResetTrigger SendAlarmResetTrigger SendAlarmResetTrigger SendAlarmResetTrigger SendAlarmResetTrigger SendAlarmResetTrigger SendAlarmResetTrigger SendAlarmResetTrigger kindly please give me the reply...what happens on here.....:(
    Link to this post 03 Mar 12

    hi all,
    I am using leopard board dm355,when i compiling the following error will occured,

    Welcome to minicom 2.5

    OPTIONS: I18n
    Compiled on May 2 2011, 00:39:27.
    Port /dev/ttyS0

    Press CTRL-A Z for help on special keys

    Chip initialization passed!
    TI UBL Version: 1.30
    Booting Catalog Boot Loader
    BootMode = NAND
    Starting NAND Copy...
    Valid MagicNum found.
    DONE
    Jumping to entry point at 0x81080000.


    U-Boot 1.2.0 (Feb 24 2010 - 11:46:45)LEOPARD-1.0.0

    DRAM: 128 MB
    NAND: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,)
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    nand_read_bbt: Bad block at 0x00ae0000
    256 MiB
    In: serial
    Out: serial
    Err: serial
    ARM Clock :- 216MHz
    DDR Clock :- 171MHz
    Hit any key to stop autoboot: 0

    NAND read: device 0 offset 0x1000000, size 0x800000
    8388608 bytes read: OK

    Loading from NAND 256MiB 3,3V 8-bit, offset 0x400000
    Image Name: Linux-2.6.10_mvl401_IPNC-1.1.0
    Image Type: ARM Linux Kernel Image (uncompressed)
    Data Size: 1490704 Bytes = 1.4 MB
    Load Address: 80008000
    Entry Point: 80008000
    ## Booting image at 80700000 ...
    Image Name: Linux-2.6.10_mvl401_IPNC-1.1.0
    Image Type: ARM Linux Kernel Image (uncompressed)
    Data Size: 1490704 Bytes = 1.4 MB
    Load Address: 80008000
    Entry Point: 80008000
    Verifying Checksum ... OK
    OK

    Starting kernel ...

    Linux version 2.6.10_mvl401_IPNC-1.1.0 (leon@localhost.localdomain) (gcc versio9
    CPU: ARM926EJ-Sid(wb) [41069265] revision 5 (ARMv5TEJ)
    CPU0: D VIVT write-back cache
    CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
    CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
    Machine: DaVinci DM355 IPNetCam
    Memory policy: ECC disabled, Data cache writeback
    DM0350
    Built 1 zonelists
    Kernel command line: mem=80M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x1
    PID hash table entries: 512 (order: 9, 8192 bytes)
    Console: colour dummy device 80x30
    Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
    Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
    Memory: 80MB = 80MB total
    Memory: 69504KB available (2596K code, 589K data, 160K init)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    spawn_desched_task(00000000)
    desched cpu_callback 3/00000000
    ksoftirqd started up.
    desched cpu_callback 2/00000000
    checking if image is initramfs...desched thread 0 started up.
    it isn't (no cpio magic); looks like an initrd
    Freeing initrd memory: 8192K
    NET: Registered protocol family 16
    Registering platform device 'serial8250.0'. Parent at platform
    Registering platform device 'nand_davinci.0'. Parent at platform
    Registering platform device 'dm9000.0'. Parent at platform
    Registering platform device 'mmc.0'. Parent at platform
    DaVinci I2C DEBUG: 20:20:50 Mar 9 2009
    Registering platform device 'i2c'. Parent at platform
    SCSI subsystem initialized
    Registering platform device 'dm_spi.0'. Parent at platform
    NetWinder Floating Point Emulator V0.97 (double precision)
    JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
    yaffs Mar 9 2009 20:20:27 Installing.
    Initializing Cryptographic API
    Registering platform device 'dm355fb.0'. Parent at platform
    Console: switching to colour frame buffer device 90x30
    watchdog: TI DaVinci Watchdog Timer: timer margin 64 sec
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    DaVinci I2C WARNING: i2c: NACK detected
    DaVinci I2C WARNING: i2c: RAR detected
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    Registering platform device 'serial8250'. Parent at platform
    ttyS0 at MMIO 0x1c20000 (irq = 40) is a 16550A
    ttyS1 at MMIO 0x1c20400 (irq = 41) is a 16550A
    ttyS2 at MMIO 0x1e06000 (irq = 14) is a 16550A
    io scheduler noop registered
    io scheduler anticipatory registered
    RAMDISK driver initialized: 1 RAM disks of 32768K size 1024 blocksize
    loop: loaded (max 8 devices)
    dm9000 Ethernet Driver
    dm9000: read chip_revision 0x00000019
    Getting MAC from env var 'ethaddr'..
    eth0: dm9000 at c5860000,c5862010 IRQ 53 MAC: 00:0c:0c:a0:00:89
    i2c /dev entries driver
    Linux video capture interface: v1.00
    Registering platform device 'vpfe.1'. Parent at platform
    vpfe vpfe.1: DaVinci v4l2 capture driver V1.0 loaded
    ipipe major#: 254, minor# 0
    Registering platform device 'dm355_ipipe.2'. Parent at platform
    ipipe driver registered
    aew major#: 253, minor# 0
    Registering platform device 'dm355_aew.2'. Parent at platform
    elevator: using anticipatory as default io scheduler
    nand_davinci nand_davinci.0: Using 4-bit hardware ECC
    NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bi)
    Creating 5 MTD partitions on "nand_davinci.0":
    0x00000000-0x00060000 : "bootloader"
    0x00060000-0x00200000 : "params"
    0x00200000-0x00400000 : "kernel"
    0x00400000-0x01800000 : "filesystem"
    0x01800000-0x10000000 : "data"
    nand_davinci nand_davinci.0: hardware revision: 2.3
    drivers/spi/spi.c:scan_boardinfo:304
    modias AIC26 irq 0 max_speed 2000000 bus_num 65535 chip_select 0 mode 0
    dm_spi.0: dm355 SPI Controller driver at 0xc5864000 (irq = 42)
    mmc mmc.0: Supporting 4-bit mode
    mmc mmc.0: Using DMA mode
    Registering platform device 'davinci-audio.0'. Parent at platform
    MMC cmd.resp[0] = aa orc=0
    MMC cmd.resp[0] = aa orc=300000
    MMC: selected 50.000MHz transfer rate
    MMC: selected 50.000MHz transfer rate
    mmcblk0: mmc0:b368 LEXAR 3914752KiB
    NET: Registered protocol family 2
    mmcblk0: p1
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 8192 bind 16384)
    Initializing XFRM netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 10
    IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    i=409 Speed=100
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    Sending DHCP requests ., OK
    IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.1.20
    IP-Config: Complete:
    device=eth0, addr=192.168.1.20, mask=255.255.255.0, gw=192.168.1.1,
    host=192.168.1.20, domain=, nis-domain=(none),
    bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath=
    RAMDISK: Compressed image found at block 0
    VFS: Mounted root (ext2 filesystem).
    Freeing init memory: 160K
    INIT: version 2.85 booting
    0
    mknod: /dev/ptmx: File exists
    Mounting a tmpfs over /dev...done.
    Creating initial device nodes...done.
    0
    Mounting local filesystems: mount none on /dev/shm type tmpfs (rw,size=5M)
    none on /var/run type tmpfs (rw)
    none on /tmp type tmpfs (rw,sync)
    Starting hotplug subsystem:
    pci
    pci [success]
    usb
    usb [success]
    isapnp
    isapnp [success]
    ide
    ide [success]
    input
    input [success]
    scsi
    scsi [success]
    done.
    Starting portmap daemon: portmap/etc/rc.d/rcS.d/S41portmap: 156: nice: not found
    pidof: invalid option -- x
    BusyBox v1.01 (2005.12.18-04:57+0000) multi-call binary

    No help available.

    .
    ioremap_nocache(0x85000000, 50331648)=0xc5880000
    allocated heap buffer 0xc5880000 of size 0x26c000
    cmem initialized 13 pools between 0x85000000 and 0x88000000
    sbulla: unknown partition table
    musb_hdrc: version 2.2a/db-0.4.8 [cppi-dma] [peripheral] [debug=0]
    Registering platform device 'musb_hdrc'. Parent at platform
    musb_hdrc: USB Peripheral mode controller at c5866000 using DMA, IRQ 12
    mkdosfs 2.11 (12 Mar 2005)
    /dev/sbulla has 4 heads and 16 sectors per track,
    logical sector size is 512,
    using 0xf8 media descriptor, with 1024 sectors;
    file system has 2 12-bit FATs and 4 sectors per cluster.
    FAT size is 1 sector, and provides 247 clusters.
    Root directory contains 512 slots.
    Volume ID is 32c7064e, no volume label.
    ECC_STATE_TOO_MANY_ERRS
    mtd->read(0x400 bytes from 0xdba0000) returned ECC error
    ECC_STATE_TOO_MANY_ERRS
    mtd->read(0x44 bytes from 0xdba077c) returned ECC error
    jffs2_get_inode_nodes(): Data CRC failed on node at 0x0dba077c: Read 0xf1a4b34dd
    ECC_STATE_TOO_MANY_ERRS
    mtd->read(0x44 bytes from 0xdba0738) returned ECC error
    ECC_STATE_TOO_MANY_ERRS
    mtd->read(0x44 bytes from 0xdba0684) returned ECC error
    Creat queue id:0
    queue id:0
    Creat queue id:32769
    queue id:32769
    IPNC-1.1.0 (leon@localhost.localdomain) (gcc version 3.4.3 (MontaVista
    Creat queue id:65538
    queue id:65538
    queue id:32769
    Error: Invalid Semaphore handler
    Error: Invalid Semaphore handler
    queue id:65538
    ApproDrvInit: 3
    Creat queue id:98307
    queue id:98307
    umount: /mnt/mmc: Invalid argument
    FAT: bogus number of reserved sectors
    VFS: Can't find a valid FAT filesystem on dev mmcblk0.
    FAT: bogus number of reserved sectors
    VFS: Can't find a valid FAT filesystem on dev mmcblk0.
    yaffs: dev is 266338304 name is "mmcblk0"
    yaffs: Attempting MTD mount on 254.0, "mmcblk0"
    yaffs: dev is 266338304 name is "mmcblk0"
    yaffs: Attempting MTD mount on 254.0, "mmcblk0"
    mount: you must specify the filesystem type
    Error: Invalid Semaphore handler
    Error: Invalid Semaphore handler
    killall: dhcpcd: no process killed
    rm: cannot remove `/var/run/dhcpcd-eth0.pid': No such file or directory
    net_search_gateway:eth0, 1A8C0, 0, 1
    dns=192.168.1.1

    nVideocodecmode = 0

    nVideocodecres = 0
    ./encode_stream -u 4 -q 50 -d -r 1280x720 -e 352x192 -w 640x352 -b 4000000 -m 1&
    SendAlarmResetTrigger
    CVBR
    Encode demo started.
    720P MODE
    fixInfo.line_length = 1440
    varInfo.yres_virtual = 1728
    queue id:98307
    vpfe vpfe.1:
    Validation pass
    queue id:65538
    queue id:32769
    CPU MIPS = 107.720001
    CPU is 216Mhz
    bit_rate_ctrl = 1
    CPU CurrentStatus is = 0
    CPU CurrentStatus is = 0
    bit_rate_ctrl = 1
    CPU CurrentStatus is = 0
    IPNC-1.1.0 (leon@locdavinci-McBSP: McBSP2 io_base: 0xe1204000
    alhost.localdomain) (gcc version 3.4.3 (MontaVista
    Blocksize: 2048
    encode_buffer size= 16384
    queue id:0
    queue id:32769
    IPNC-1.1.0 (leon@localhost.localdomain) (gcc version 3.4.3 (MontaVista
    Check_AutoIris: 1
    Appro XDM
    Aew_Cal_read_parameter !!
    MOTION_STREAM1
    IsMotionOn = 0
    CPU CurrentStatus is = 0
    SendAlarmResetTrigger
    APPRO AEW TRIAL VERSION !!!
    APPRO AEW DATE LINE 2009/6


    MOTION_STREAM2
    IsMotionOn = 0

    CPU CurrentStatus is = 0
    ApproDrvInit: 7
    queue id:98307
    net_search_gateway:eth0, 1A8C0, 0, 1
    net_search_gateway:eth0, 0, FE01A8C0, 3
    dns=192.168.1.1
    SendAlarmResetTrigger
    rmmod: g_file_storage.ko: No such file or directory
    g_file_storage gadget: File-backed Storage Gadget, version: 20 October 2004
    g_file_storage gadget: Number of LUNs=1
    g_file_storage gadget-lun0: ro=0, file: /dev/sbulla
    usb connect
    SendAlarmResetTrigger
    g_file_storage gadget: high speed config #1
    SendAlarmResetTrigger
    SendAlarmResetTrigger
    ApproDrvInit: 6
    queue id:98307
    ApproDrvInit: 2
    queue id:98307
    Initializing...
    ...done initializing
    Play this stream using the URL:
    rtsp://192.168.1.168/mpeg4
    Initializing...
    ...done initializing
    Play this stream using the URL:
    rtsp://192.168.1.168:8554/mpeg4
    SendAlarmResetTrigger
    Audio disabled!
    Audio disabled!
    [30/Dec/1996:00:01:23 +0000] boa: server version Boa/0.94.13
    [30/Dec/1996:00:01:23 +0000] boa: server built Feb 10 2009 at 00:06:03.
    [30/Dec/1996:00:01:23 +0000] boa: starting server pid=1010, port 80
    INIT: Entering runlevel: 3
    SendAlarmResetTrigger
    queue id:0
    UDPString=uuid:Upnp-TVEmulator-1_0-00_0040771948</UDN>

    Upnp port is 0
    UPnP Initialized OK ip=192.168.1.168, port=49152
    desc_doc_url = http://192.168.1.168/tvdevicedesc.xml
    error code = 0
    Starting internet superserver: inetd.
    SendAlarmResetTrigger
    device advertisement succeed.
    SendAlarmResetTrigger

    MontaVista(R) Linux(R) Professional Edition 4.0.1 (0502020)

    192.168.1.20 login: SendAlarmResetTrigger
    SendAlarmResetTrigger
    SendAlarmResetTrigger
    SendAlarmResetTrigger
    SendAlarmResetTrigger
    SendAlarmResetTrigger
    SendAlarmResetTrigger
    SendAlarmResetTrigger
    SendAlarmResetTrigger

    kindly please give me the reply...what happens on here.....:(

  • shobin
    RE: add or remove modules
    hi, thank u...but how to know which modules are necessary & whichever unnecessary in that kernel....how to remove it?..& how to add some modules whenever we want?...how to know the modules interconnected with another one?...how it is automatically removed?..pls help me.......
    Link to this post 18 Feb 12

    hi,

    thank u...but how to know which modules are necessary & whichever unnecessary in that kernel....how to remove it?..& how to add some modules whenever we want?...how to know the modules interconnected with another one?...how it is automatically removed?..pls help me.......

  • shobin
    add or remove modules
    hi all, i want to know how we know ,which modules in board we wants & which modules those we don't want & how is it interconnected.how we can add or remove that modules....how is it used...i am a beginner..pls help me.......
    Link to this post 17 Feb 12

    hi all,
    i want to know how we know ,which modules in board we wants & which modules those we don't want & how is it interconnected.how we can add or remove that modules....how is it used...i am a beginner..pls help me.......

Who we are ?

The Linux Foundation is a non-profit consortium dedicated to the growth of Linux.

More About the foundation...

Frequent Questions

Join / Linux Training / Board