I'm having the same problem -- cluster is configured exactly as you describe but I can't get the shared IP resource to start. Unknown State 118.
Did you ever figure this one out?
Please help me with the exact steps on configuring two node cluster on RHEL 6.2,
I failed to configure the simplest cluster by below steps,
1- install RHEL 6.2 64-bit on both nodes
2- add to hosts file of each server ( 1 IP in local NW and another in IP private NW).
3- yum install ricci ( on both nodes )
4- yum install luci ( on 1 node )
5- yum groupinstall "high availability" ( on both nodes )
6- from browser, node1-pub:8084
( login and create new cluster )
give cluster name, nodes name are (node1-pvt),(node2-pvt)
7- cluster is UP with two nodes, so far.
8- configure failover domain and select both nodes.
9- configure resource(IP) and give IP in same range of public network.
10- configure servicegroup and assign the failover domain and the IP resource to the servicegroup.
11- IP doesn't start.
Nov 24 02:59:37 rgmanager start on ip "10.10.4.223/255.255.255.0" returned 1 (generic error)
Nov 24 02:59:37 rgmanager #68: Failed to start service:vip
; return value: 1
Nov 24 02:59:37 rgmanager Stopping service service:vip
Nov 24 02:59:37 rgmanager [ip] 10.10.4.223/255.255.255.0 is not configured
Nov 24 02:59:37 rgmanager Service service:vip
Nov 24 02:59:38 rgmanager #71: Relocating failed service service:vip
from luci i get this error
Starting cluster "cluname" service "vip" from node "node1-pvt" failed: vip is in unknown state 118
what did i miss?