No entries for my cdrom/dvdrom drives in fstab, just my main partition, swap partition, floppy drive, and my 1Tb ntfs partition that Windows is on. I did check dmesg though and I found out I`m getting a slightly different error depending on whether I put the disc in my cd burner or my dvd burner (sr1 and sr0 respectively):

[  256.987296] sr 1:0:1:0: [sr1] Unhandled sense code

[  256.987301] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[  256.987307] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] 

[  256.987314] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error

[  256.987321] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 01 e2 40 00 00 02 00

[  256.987337] end_request: I/O error, dev sr1, sector 493824

[  256.987343] Buffer I/O error on device sr1, logical block 61728

[  259.569631] sr 1:0:1:0: [sr1] Unhandled sense code

[  259.569636] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[  259.569642] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] 

[  259.569649] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error

[  259.569656] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 01 e2 40 00 00 02 00

[  259.569672] end_request: I/O error, dev sr1, sector 493824

[  259.569678] Buffer I/O error on device sr1, logical block 61728

[  262.126613] sr 1:0:1:0: [sr1] Unhandled sense code

[  262.126619] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[  262.126625] sr 1:0:1:0: [sr1] Sense Key : Medium Error [current] 

[  262.126631] sr 1:0:1:0: [sr1] Add. Sense: Unrecovered read error

[  262.126638] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 01 e2 40 00 00 02 00

[  262.126654] end_request: I/O error, dev sr1, sector 493824

[  262.126660] Buffer I/O error on device sr1, logical block 61728

and

[  449.029406] sr 1:0:0:0: [sr0] Unhandled sense code

[  449.029412] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[  449.029418] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 

[  449.029424] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error

[  449.029431] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 e2 40 00 00 02 00

[  449.029447] end_request: I/O error, dev sr0, sector 493824

[  449.029452] Buffer I/O error on device sr0, logical block 61728

[  456.907161] sr 1:0:0:0: [sr0] Unhandled sense code

[  456.907166] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[  456.907172] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 

[  456.907179] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error

[  456.907186] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 e2 40 00 00 02 00

[  456.907202] end_request: I/O error, dev sr0, sector 493824

[  456.907208] Buffer I/O error on device sr0, logical block 61728

[  464.898303] sr 1:0:0:0: [sr0] Unhandled sense code

[  464.898309] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[  464.898315] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 

[  464.898322] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error

[  464.898329] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 e2 40 00 00 02 00

[  464.898345] end_request: I/O error, dev sr0, sector 493824

[  464.898350] Buffer I/O error on device sr0, logical block 61728

but I can make an ISO image of the disc just fine using Imgburn and can even mount it and access it just fine too. Here`s the log from Imgburn making an ISO image of the disc, as you can see there are no errors reported.

I 14:13:11 ImgBurn Version 2.5.5.0 started!

I 14:13:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 14:13:11 Total Physical Memory: 3,002,324 KB  -  Available: 2,214,972 KB

I 14:13:11 Initialising ASPI...

I 14:13:11 WNASPI32.DLL - Adaptec`s ASPI Layer - ASPI for Win32 (95/NT) DLL - Version 4.71.2.0

I 14:13:11 Searching for SCSI / ATAPI devices...

I 14:13:11 -> Drive 1 - Info: TSSTcorp CDDVDW SH-S222A SB02

I 14:13:11 -> Drive 2 - Info: LITE-ON LTR-52246S 6S0F

I 14:13:11 Found 1 CD-RW and 1 DVD±RW/RAM!

I 14:14:26 Operation Started!

I 14:14:26 Source Device: [0] TSSTcorp CDDVDW SH-S222A SB02

I 14:14:26 Source Media Type: CD-R (Disc ID: 97m26s66f, CMC Magnetics Corp.) (Speeds: 8x, 16x, 24x, 32x, 40x, 48x)

I 14:14:26 Source Media Sectors: 123,458

I 14:14:26 Source Media Size: 252,841,984 bytes

I 14:14:26 Source Media Volume Identifier: Stuff

I 14:14:26 Source Media Volume Set Identifier: 4D1BBD8A(NULL)

I 14:14:26 Source Media Application Identifier: CDBurnerXP 4.3.8.2474

I 14:14:26 Source Media Implementation Identifier: NMS DVDProLib

I 14:14:27 Source Media File System(s): ISO9660, Joliet, UDF (1.02)

I 14:14:27 Read Speed (Data/Audio): MAX / 8x

I 14:14:27 Hardware Read Error Retries: 2

I 14:14:27 Destination File: I:\ISO`s\Stuff.iso

I 14:14:27 Destination Free Space: 300,591,083,520 Bytes (293,545,980 KB) (286,665 MB) (279 GB)

I 14:14:27 Destination File System: NTFS

I 14:14:27 File Splitting: Auto

I 14:14:46 Reading Session 1 of 1... (1 Track, LBA: 0 - 123457)

I 14:14:46 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 123457)

I 14:17:45 Exporting Graph Data...

I 14:17:45 Graph Data File: C:\users\user\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S222A_SB02_FRIDAY-MAY-13-2011_2-14_PM_97m26s66f.ibg

I 14:17:45 Export Successfully Completed!

I 14:17:45 Operation Successfully Completed! - Duration: 00:03:18

I 14:17:45 Average Read Rate: 1,247 KB/s (8.3x) - Maximum Read Rate: 1,717 KB/s (11.4x)

(the `I` at the beginning of each line is just from a little `info` icon, for some reason it translates into the letter `I` when everything is copied and pasted)

I figured out I can use `pmount` as normal user and force it to identify the filesystem type as `iso9660` just like the mount command I had success using as root. I can even tell it specifically where to mount a disc and it will create the mount point itself in /media. It doesn`t create an entry in my `Places` panel but that`s ok I created a manual link in it that points to the location `/media/cdrom` and I just use

pmount -r -t iso9660 /dev/sr1 cdrom

to mount it at that location and

pumount /dev/sr1

to unmount it.

So I have a relatively easy to use method for accessing those troublesome discs now it seems. Again thank you for all of your help with trying to figure this out, now I just need to hack together a shell script that I can use to `toggle` the mounting on each drive. I think I can do it if there is a bash equivalent to the msdos `if exist` batch file command. using it to check first to see if the mountpoint actually exists or not (since unmounting a device with `pumount` also causes the mountpoint to be removed), so if I can detect if the /media/cdrom mountpoint already exists then I can have it issue the pumount command to unmount the device, and if it doesn`t exist then have it issue the pmount command to mount, it of course I`ll want to provide some feedback so I know wether it was successful or not and if I can find out how to send popup messages to the notification window in the system tray then I think I`ll have everything I need.

Again thank you for all your help trying to figure this out. I think I`m going to just plan on using pmount since it seems to be able to deal with mounting these discs without any real problem.

Thank you,
bartman2589

The more I look at the dmesg output from when I just simply put the disc in the drive without attempting to manually mount it but instead relying on the automount feature the more I think that whatever program I used to write these discs might have messed up some crucial part of the disc that the automount process needs to be able to read in order to be able to determine what filesystem is being used by the disc. In particular I was looking at the lines

[ 9249.926985] end_request: I/O error, dev sr1, sector 493824

[ 9249.926991] Buffer I/O error on device sr1, logical block 61728

that seems to accompany every attempt to allow the automount process to mount this disc. I even get the same line basically when I try the disc in my other drive. And when I try the disc in all 3 drives in my other system (of course 2 of those drives are the exact same make/model/firmware revision as the 2 in my main system, the 3rd is just a simple LG 48x CD reader) I get the same error as well, specifically referencing `logical block 61728`. By manually telling it to use only iso9660 based filesystems then it`s not looking at the messed up data I think but instead already knows to go to certain parts of the disc I`m guessing. I get similar errors when I try to let automount mount the other troublesome discs but the location on the disc appears to be different, I`m guessing that the automount process just can`t handle discs with any defects on them so it just completely fails to mount them. Here`s the dmesg output from another disc I have trouble with:

[10208.605716] sr 1:0:0:0: [sr0] Unhandled sense code

[10208.605722] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[10208.605728] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 

[10208.605735] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error

[10208.605742] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 42 00 00 02 00

[10208.605758] end_request: I/O error, dev sr0, sector 1189128

[10208.605763] Buffer I/O error on device sr0, logical block 148641

[10213.365756] sr 1:0:0:0: [sr0] Unhandled sense code

[10213.365761] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[10213.365768] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 

[10213.365774] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error

[10213.365781] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 42 00 00 02 00

[10213.365798] end_request: I/O error, dev sr0, sector 1189128

[10213.365803] Buffer I/O error on device sr0, logical block 148641

[10218.019127] sr 1:0:0:0: [sr0] Unhandled sense code

[10218.019132] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[10218.019138] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 

[10218.019145] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error

[10218.019152] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 42 00 00 02 00

[10218.019168] end_request: I/O error, dev sr0, sector 1189128

[10218.019174] Buffer I/O error on device sr0, logical block 148641

[10222.672283] sr 1:0:0:0: [sr0] Unhandled sense code

[10222.672289] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[10222.672295] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 

[10222.672302] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error

[10222.672308] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 89 42 00 00 02 00

[10222.672325] end_request: I/O error, dev sr0, sector 1189128

[10222.672330] Buffer I/O error on device sr0, logical block 148641

notice the `I/O error` messages just like with the other disc (albeit with a different location on the disc), again the automount fails to mount it, but pmount mounts it just fine and I was again able to copy all of the files off of the disc without any errors being reported. I`m starting to think it`s not the fault of the automount process (at least not entirely), I just think it`s not capable of handling discs with minor defects very well, defects that most other programs seem to be able to cope with just fine I`m guessing. Anyway pmount lets me do what I needed to do and it`ll be a nice challenge to write a shell script to be able to mount them with only a couple clicks as opposed to having to manually type out a mount command each time.