|
In general I have noticed that many distros misconfigure their default baud rated for usb modems, which forces them to run at a slower rate. You should be able to go into your network configuration tool that you used to setup the device and modify the baud rates to values that more closely match those used by the device in windows to increase the bandwidth. |
|||
|
|
[quote name="mfillpot"]In general I have noticed that many distros misconfigure their default baud rated for usb modems, which forces them to run at a slower rate. You should be able to go into your network configuration tool that you used to setup the device and modify the baud rates to values that more closely match those used by the device in windows to increase the bandwidth. |
|||
|
|
I have not had to setup a use modem in windows in a long time, so I would assume that the options will be in the connection initialization application, the network connection options or embedded in the driver information as you would view it in the device manager. |
|||
|
|
[quote name="mfillpot"]I have not had to setup a use modem in windows in a long time, so I would assume that the options will be in the connection initialization application, the network connection options or embedded in the driver information as you would view it in the device manager. |
|||
|
|
fedora BY DEFAULT has ipv6 turned on |
|||
|
|
10
Answers
|
|
10
Answers
|
|
4
Answers
|
|
27
Answers
|
|
27
Answers
|
|
0
Answers
|
|
0
Answers
|
|
0
Answers
|
|
1
Answer
|
|
0
Answers
|
The Linux Foundation is a non-profit consortium dedicated to the growth of Linux.
Join / Linux Training / Board