RCMDSection: Linux Programmer's Manual (3)
Index Return to Main Contents
NAMErcmd, rresvport, iruserok, ruserok - routines for returning a stream to a remote command
#include <netdb.h> /* Or <unistd.h> on some systems */ int rcmd(char **ahost, int inport, const char *locuser, const char *remuser, const char *cmd, int *fd2p); int rresvport(int *port); int iruserok(uint32_t raddr, int superuser, const char *ruser, const char *luser); int ruserok(const char *rhost, int superuser, const char *ruser, const char *luser);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
DESCRIPTIONThe rcmd() function is used by the superuser to execute a command on a remote machine using an authentication scheme based on privileged port numbers. The rresvport() function returns a descriptor to a socket with an address in the privileged port space. The iruserok() and ruserok() functions are used by servers to authenticate clients requesting service with rcmd(). All four functions are present in the same file and are used by the rshd(8) server (among others).
The rcmd() function looks up the host *ahost using gethostbyname(3), returning -1 if the host does not exist. Otherwise *ahost is set to the standard name of the host and a connection is established to a server residing at the well-known Internet port inport.
If the connection succeeds, a socket in the Internet domain of type SOCK_STREAM is returned to the caller, and given to the remote command as stdin and stdout. If fd2p is non-zero, then an auxiliary channel to a control process will be set up, and a descriptor for it will be placed in *fd2p. The control process will return diagnostic output from the command (unit 2) on this channel, and will also accept bytes on this channel as being Unix signal numbers, to be forwarded to the process group of the command. If fd2p is 0, then the stderr (unit 2 of the remote command) will be made the same as the stdout and no provision is made for sending arbitrary signals to the remote process, although you may be able to get its attention by using out-of-band data.
The protocol is described in detail in rshd(8).
The rresvport() function is used to obtain a socket with a privileged address bound to it. This socket is suitable for use by rcmd() and several other functions. Privileged Internet ports are those in the range 0 to 1023. Only the superuser is allowed to bind an address of this sort to a socket.
The iruserok() and ruserok() functions take a remote host's IP address or name, respectively, two usernames and a flag indicating whether the local user's name is that of the superuser. Then, if the user is not the superuser, it checks the /etc/hosts.equiv file. If that lookup is not done, or is unsuccessful, the .rhosts in the local user's home directory is checked to see if the request for service is allowed.
If this file does not exist, is not a regular file, is owned by anyone other than the user or the superuser, or is writable by anyone other than the owner, the check automatically fails. Zero is returned if the machine name is listed in the hosts.equiv file, or the host and remote username are found in the .rhosts file; otherwise iruserok() and ruserok() return -1. If the local domain (as obtained from gethostname(2)) is the same as the remote domain, only the machine name need be specified.
RETURN VALUEThe rcmd() function returns a valid socket descriptor on success. It returns -1 on error and prints a diagnostic message on the standard error.
The rresvport() function returns a valid, bound socket descriptor on success. It returns -1 on error with the global value errno set according to the reason for failure. The error code EAGAIN is overloaded to mean "All network ports in use."
CONFORMING TONot in POSIX.1-2001. Present on the BSDs, Solaris, and many other systems. These functions appeared in 4.2BSD.
BUGSiruserok() is not declared in glibc headers.
SEE ALSOrlogin(1), rsh(1), intro(2), rexec(3), rexecd(8), rlogind(8), rshd(8)
COLOPHONThis page is part of release 3.21 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.