Linux.com

console.4

CONSOLE

Section: Linux Programmer's Manual (4)
Updated: 1994-10-31
Index Return to Main Contents
 

NAME

console - console terminal and virtual consoles  

DESCRIPTION

A Linux system has up to 63 virtual consoles (character devices with major number 4 and minor number 1 to 63), usually called /dev/ttyn with 1 ≤ n ≤ 63. The current console is also addressed by /dev/console or /dev/tty0, the character device with major number 4 and minor number 0. The device files /dev/* are usually created using the script MAKEDEV, or using mknod(1), usually with mode 0622 and owner root.tty.

Before kernel version 1.1.54 the number of virtual consoles was compiled into the kernel (in tty.h: #define NR_CONSOLES 8) and could be changed by editing and recompiling. Since version 1.1.54 virtual consoles are created on the fly, as soon as they are needed.

Common ways to start a process on a console are: (a) tell init(8) (in inittab(5)) to start a mingetty(8) (or agetty(8)) on the console; (b) ask openvt(1) to start a process on the console; (c) start X --- it will find the first unused console, and display its output there. (There is also the ancient doshell(8).)

Common ways to switch consoles are: (a) use Alt+Fn or Ctrl+Alt+Fn to switch to console n; AltGr+Fn might bring you to console n+12 [here Alt and AltGr refer to the left and right Alt keys, respectively]; (b) use Alt+RightArrow or Alt+LeftArrow to cycle through the presently allocated consoles; (c) use the program chvt(1). (The key mapping is user settable, see loadkeys(1); the above mentioned key combinations are according to the default settings.)

The command deallocvt(1) (formerly disalloc) will free the memory taken by the screen buffers for consoles that no longer have any associated process.  

Properties

Consoles carry a lot of state. I hope to document that some other time. The most important fact is that the consoles simulate vt100 terminals. In particular, a console is reset to the initial state by printing the two characters ESC c. All escape sequences can be found in console_codes(4).  

FILES

/dev/console
/dev/tty*  

SEE ALSO

chvt(1), deallocvt(1), loadkeys(1), mknod(1), openvt(1), console_codes(4), console_ioctl(4), tty(4), ttyS(4), charsets(7), agetty(8), init(8), mapscrn(8), mingetty(8), resizecons(8), setfont(8)  

COLOPHON

This page is part of release 3.21 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.


 

Index

NAME
DESCRIPTION
Properties
FILES
SEE ALSO
COLOPHON

 

Comments

Subscribe to Comments Feed

Upcoming Linux Foundation Courses

  1. LFD331 Developing Linux Device Drivers
    25 Aug » 29 Aug - Virtual
    Details
  2. LFD411 Embedded Linux Development
    25 Aug » 29 Aug - Santa Clara, CA
    Details
  3. LFS422 High Availability Linux Architecture
    08 Sep » 11 Sep - Raleigh, NC
    Details

View All Upcoming Courses

Become an Individual Member
Check out the Friday Funnies

Sign Up For the Linux.com Newsletter


Who we are ?

The Linux Foundation is a non-profit consortium dedicated to the growth of Linux.

More About the foundation...

Frequent Questions

Join / Linux Training / Board