Linux.com

setitimer.2

GETITIMER

Section: Linux Programmer's Manual (2)
Updated: 2009-03-15
Index Return to Main Contents
 

NAME

getitimer, setitimer - get or set value of an interval timer  

SYNOPSIS

#include <sys/time.h>

int getitimer(int which, struct itimerval *curr_value);

int setitimer(int which, const struct itimerval *new_value, struct itimerval *old_value);
 

DESCRIPTION

The system provides each process with three interval timers, each decrementing in a distinct time domain. When any timer expires, a signal is sent to the process, and the timer (potentially) restarts.
ITIMER_REAL
decrements in real time, and delivers SIGALRM upon expiration.
ITIMER_VIRTUAL
decrements only when the process is executing, and delivers SIGVTALRM upon expiration.
ITIMER_PROF
decrements both when the process executes and when the system is executing on behalf of the process. Coupled with ITIMER_VIRTUAL, this timer is usually used to profile the time spent by the application in user and kernel space. SIGPROF is delivered upon expiration.

Timer values are defined by the following structures:


struct itimerval {
    struct timeval it_interval; /* next value */
    struct timeval it_value;    /* current value */
};

struct timeval {
    long tv_sec;                /* seconds */
    long tv_usec;               /* microseconds */
};

The function getitimer() fills the structure pointed to by curr_value with the current setting for the timer specified by which (one of ITIMER_REAL, ITIMER_VIRTUAL, or ITIMER_PROF). The element it_value is set to the amount of time remaining on the timer, or zero if the timer is disabled. Similarly, it_interval is set to the reset value.

The function setitimer() sets the specified timer to the value in new_value. If old_value is non-NULL, the old value of the timer is stored there.

Timers decrement from it_value to zero, generate a signal, and reset to it_interval. A timer which is set to zero (it_value is zero or the timer expires and it_interval is zero) stops.

Both tv_sec and tv_usec are significant in determining the duration of a timer.

Timers will never expire before the requested time, but may expire some (short) time afterwards, which depends on the system timer resolution and on the system load; see time(7). (But see BUGS below.) Upon expiration, a signal will be generated and the timer reset. If the timer expires while the process is active (always true for ITIMER_VIRTUAL) the signal will be delivered immediately when generated. Otherwise the delivery will be offset by a small time dependent on the system loading.  

RETURN VALUE

On success, zero is returned. On error, -1 is returned, and errno is set appropriately.  

ERRORS

EFAULT
new_value, old_value, or curr_value is not valid a pointer.
EINVAL
which is not one of ITIMER_REAL, ITIMER_VIRTUAL, or ITIMER_PROF; or (since Linux 2.6.22) one of the tv_usec fields in the structure pointed to by new_value contains a value outside the range 0 to 999999.
 

CONFORMING TO

POSIX.1-2001, SVr4, 4.4BSD (this call first appeared in 4.2BSD). POSIX.1-2008 marks getitimer() and setitimer() obsolete, recommending the use of the POSIX timers API (timer_gettime(2), timer_settime(2), etc.) instead.  

NOTES

A child created via fork(2) does not inherit its parent's interval timers. Interval timers are preserved across an execve(2).

POSIX.1 leaves the interaction between setitimer() and the three interfaces alarm(2), sleep(3), and usleep(3) unspecified.  

BUGS

The generation and delivery of a signal are distinct, and only one instance of each of the signals listed above may be pending for a process. Under very heavy loading, an ITIMER_REAL timer may expire before the signal from a previous expiration has been delivered. The second signal in such an event will be lost.

On Linux kernels before 2.6.16, timer values are represented in jiffies. If a request is made set a timer with a value whose jiffies representation exceeds MAX_SEC_IN_JIFFIES (defined in include/linux/jiffies.h), then the timer is silently truncated to this ceiling value. On Linux/i386 (where, since Linux 2.6.13, the default jiffy is 0.004 seconds), this means that the ceiling value for a timer is approximately 99.42 days. Since Linux 2.6.16, the kernel uses a different internal representation for times, and this ceiling is removed.

On certain systems (including i386), Linux kernels before version 2.6.12 have a bug which will produce premature timer expirations of up to one jiffy under some circumstances. This bug is fixed in kernel 2.6.12.

POSIX.1-2001 says that setitimer() should fail if a tv_usec value is specified that is outside of the range 0 to 999999. However, in kernels up to and including 2.6.21, Linux does not give an error, but instead silently adjusts the corresponding seconds value for the timer. From kernel 2.6.22 onwards, this non-conformance has been repaired: an improper tv_usec value results in an EINVAL error.  

SEE ALSO

gettimeofday(2), sigaction(2), signal(2), timer_create(2), timerfd_create(2), time(7)  

COLOPHON

This page is part of release 3.21 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.


 

Index

NAME
SYNOPSIS
DESCRIPTION
RETURN VALUE
ERRORS
CONFORMING TO
NOTES
BUGS
SEE ALSO
COLOPHON

 

Comments

Subscribe to Comments Feed

Upcoming Linux Foundation Courses

  1. LFS230 Linux Network Management
    06 Oct » 09 Oct - Virtual
    Details
  2. LFD331 Developing Linux Device Drivers
    13 Oct » 17 Oct - Virtual
    Details
  3. LFS430 Linux Enterprise Automation
    13 Oct » 16 Oct - Virtual
    Details

View All Upcoming Courses

Become an Individual Member
Check out the Friday Funnies

Sign Up For the Linux.com Newsletter


Who we are ?

The Linux Foundation is a non-profit consortium dedicated to the growth of Linux.

More About the foundation...

Frequent Questions

Join / Linux Training / Board