March 31, 2010

How To Disable Onboard Graphics For GeForce 8500GT

Forums: 

I am running an Acer desktop with Ubuntu 10.04. I tried to install a PNY GeForce 8500GT HDMI Graphics card and neither HDMI or standard monitor works. There is power to the fan on the card. I remove the card,plug the monitor back in to mobo and works fine. Is there a motherboard jumper to disable on onboard graphics or a command in terminal I can use? First log is- dmesg and second is- lspci Thanks For Taking The Time, SAM [ 0.008345] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008348] CPU: L2 cache: 1024K
[ 0.008353] CPU: Physical Processor ID: 0
[ 0.008355] CPU: Processor Core ID: 0
[ 0.008362] mce: CPU supports 6 MCE banks
[ 0.008376] CPU0: Thermal monitoring enabled (TM2)
[ 0.008382] using mwait in idle threads.
[ 0.008392] Performance Events: Core2 events, Intel PMU driver.
[ 0.008405] ... version: 2
[ 0.008408] ... bit width: 40
[ 0.008410] ... generic registers: 2
[ 0.008413] ... value mask: 000000ffffffffff
[ 0.008415] ... max period: 000000007fffffff
[ 0.008418] ... fixed-purpose events: 3
[ 0.008420] ... event mask: 0000000700000003
[ 0.008428] Checking 'hlt' instruction... OK.
[ 0.027628] ACPI: Core revision 20090903
[ 0.039084] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.039097] ftrace: allocating 22170 entries in 44 pages
[ 0.040349] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080551] CPU0: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz stepping 0d
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012000] CPU: L2 cache: 1024K
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.012000] CPU1: Thermal monitoring enabled (TM2)
[ 0.168125] CPU1: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz stepping 0d
[ 0.168138] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172028] Brought up 2 CPUs
[ 0.172031] Total of 2 processors activated (6400.47 BogoMIPS).
[ 0.172523] CPU0 attaching sched-domain:
[ 0.172528] domain 0: span 0-1 level MC
[ 0.172531] groups: 0 1
[ 0.172540] CPU1 attaching sched-domain:
[ 0.172543] domain 0: span 0-1 level MC
[ 0.172546] groups: 1 0
[ 0.172791] devtmpfs: initialized
[ 0.173271] regulator: core version 0.5
[ 0.173298] Time: 9:10:44 Date: 03/30/10
[ 0.173357] NET: Registered protocol family 16
[ 0.173506] EISA bus registered
[ 0.173521] ACPI: bus type pci registered
[ 0.173615] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.173619] PCI: MCFG area at e0000000 reserved in E820
[ 0.173622] PCI: Using MMCONFIG for extended config space
[ 0.173624] PCI: Using configuration type 1 for base access
[ 0.175008] Trying to unpack rootfs image as initramfs...
[ 0.188414] bio: create slab at 0
[ 0.205169] ACPI: EC: Look up EC in DSDT
[ 0.213011] ACPI: Interpreter enabled
[ 0.213030] ACPI: (supports S0 S3 S4 S5)
[ 0.213064] ACPI: Using IOAPIC for interrupt routing
[ 0.220409] ACPI: No dock devices found.
[ 0.220555] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.220622] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.220822] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
[ 0.220831] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
[ 0.220840] pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
[ 0.220848] pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
[ 0.220857] pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f]
[ 0.220892] pci 0000:00:02.5: PME# supported from D3cold
[ 0.220897] pci 0000:00:02.5: PME# disabled
[ 0.220928] pci 0000:00:03.0: reg 10 32bit mmio: [0xfdfff000-0xfdffffff]
[ 0.220990] pci 0000:00:03.1: reg 10 32bit mmio: [0xfdffe000-0xfdffefff]
[ 0.221065] pci 0000:00:03.3: reg 10 32bit mmio: [0xfdffd000-0xfdffdfff]
[ 0.221118] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.221123] pci 0000:00:03.3: PME# disabled
[ 0.221168] pci 0000:00:04.0: reg 10 32bit mmio: [0xfdffc000-0xfdffc07f]
[ 0.221177] pci 0000:00:04.0: reg 14 io port: [0xfe00-0xfe7f]
[ 0.221225] pci 0000:00:04.0: supports D1 D2
[ 0.221228] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221233] pci 0000:00:04.0: PME# disabled
[ 0.221275] pci 0000:00:05.0: reg 10 io port: [0xfd00-0xfd07]
[ 0.221285] pci 0000:00:05.0: reg 14 io port: [0xfc00-0xfc03]
[ 0.221295] pci 0000:00:05.0: reg 18 io port: [0xfb00-0xfb07]
[ 0.221306] pci 0000:00:05.0: reg 1c io port: [0xfa00-0xfa03]
[ 0.221314] pci 0000:00:05.0: reg 20 io port: [0xf900-0xf90f]
[ 0.221348] pci 0000:00:05.0: PME# supported from D3cold
[ 0.221353] pci 0000:00:05.0: PME# disabled
[ 0.221454] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.221459] pci 0000:00:06.0: PME# disabled
[ 0.221515] pci 0000:00:0c.0: reg 10 32bit mmio: [0xfdffb000-0xfdffb7ff]
[ 0.221525] pci 0000:00:0c.0: reg 14 32bit mmio: [0xfdff4000-0xfdff7fff]
[ 0.221575] pci 0000:00:0c.0: supports D1 D2
[ 0.221578] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot
[ 0.221583] pci 0000:00:0c.0: PME# disabled
[ 0.221633] pci 0000:00:0f.0: reg 10 32bit mmio: [0xfdff0000-0xfdff3fff]
[ 0.221691] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[ 0.221696] pci 0000:00:0f.0: PME# disabled
[ 0.221802] pci 0000:00:1f.0: PME# supported from D0 D3hot D3cold
[ 0.221808] pci 0000:00:1f.0: PME# disabled
[ 0.221867] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.221874] pci 0000:01:00.0: reg 14 32bit mmio: [0xfdee0000-0xfdefffff]
[ 0.221882] pci 0000:01:00.0: reg 18 io port: [0xef00-0xef7f]
[ 0.221919] pci 0000:01:00.0: supports D1 D2
[ 0.221965] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.221971] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.221976] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.222042] pci 0000:00:06.0: bridge io port: [0xd000-0xdfff]
[ 0.222049] pci 0000:00:06.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.222058] pci 0000:00:06.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 0.222117] pci 0000:00:1f.0: bridge io port: [0xc000-0xcfff]
[ 0.222123] pci 0000:00:1f.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
[ 0.222132] pci 0000:00:1f.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
[ 0.222153] pci_bus 0000:00: on NUMA node 0
[ 0.222161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.252513] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.252651] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.252787] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.252922] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.253055] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.253188] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.253323] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.253454] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.253638] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.253642] vgaarb: loaded
[ 0.253820] SCSI subsystem initialized
[ 0.253966] libata version 3.00 loaded.
[ 0.254090] usbcore: registered new interface driver usbfs
[ 0.254107] usbcore: registered new interface driver hub
[ 0.254144] usbcore: registered new device driver usb
[ 0.254330] ACPI: WMI: Mapper loaded
[ 0.254333] PCI: Using ACPI for IRQ routing
[ 0.254559] NetLabel: Initializing
[ 0.254561] NetLabel: domain hash size = 128
[ 0.254564] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.254581] NetLabel: unlabeled traffic allowed by default
[ 0.254631] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.254638] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.260026] Switching to clocksource tsc
[ 0.263021] AppArmor: AppArmor Filesystem Enabled
[ 0.263051] pnp: PnP ACPI init
[ 0.263082] ACPI: bus type pnp registered
[ 0.267401] pnp: PnP ACPI: found 15 devices
[ 0.267404] ACPI: ACPI bus type pnp unregistered
[ 0.267411] PnPBIOS: Disabled by ACPI PNP
[ 0.267431] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.267435] system 00:01: ioport range 0x800-0x805 has been reserved
[ 0.267438] system 00:01: ioport range 0x290-0x297 has been reserved
[ 0.267442] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.267457] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.267465] system 00:0e: iomem range 0xf0000-0xfffff could not be reserved
[ 0.267469] system 00:0e: iomem range 0xfed00000-0xfed000ff has been reserved
[ 0.267473] system 00:0e: iomem range 0xfed30000-0xfed300ff has been reserved
[ 0.267477] system 00:0e: iomem range 0x6fff0000-0x6fffffff could not be reserved
[ 0.267480] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.267484] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.267488] system 00:0e: iomem range 0x100000-0x6ffeffff could not be reserved
[ 0.267492] system 00:0e: iomem range 0xffee0000-0xffefffff has been reserved
[ 0.267496] system 00:0e: iomem range 0xfffe0000-0xfffeffff has been reserved
[ 0.267499] system 00:0e: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.267503] system 00:0e: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.302302] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.302309] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.302316] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdefffff
[ 0.302322] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xdfffffff
[ 0.302330] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[ 0.302334] pci 0000:00:06.0: IO window: 0xd000-0xdfff
[ 0.302342] pci 0000:00:06.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.302348] pci 0000:00:06.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 0.302357] pci 0000:00:1f.0: PCI bridge, secondary bus 0000:03
[ 0.302362] pci 0000:00:1f.0: IO window: 0xc000-0xcfff
[ 0.302371] pci 0000:00:1f.0: MEM window: 0xfdb00000-0xfdbfffff
[ 0.302378] pci 0000:00:1f.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
[ 0.302398] pci 0000:00:01.0: setting latency timer to 64
[ 0.302411] pci 0000:00:06.0: setting latency timer to 64
[ 0.302423] pci 0000:00:1f.0: setting latency timer to 64
[ 0.302430] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.302434] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.302437] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.302440] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.302444] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.302447] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.302450] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.302453] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff]
[ 0.302456] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.302459] pci_bus 0000:03: resource 1 mem: [0xfdb00000-0xfdbfffff]
[ 0.302463] pci_bus 0000:03: resource 2 pref mem [0xfda00000-0xfdafffff]
[ 0.302532] NET: Registered protocol family 2
[ 0.302690] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.303163] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.304334] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.304973] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.304979] TCP reno registered
[ 0.305182] NET: Registered protocol family 1
[ 0.359433] pci 0000:01:00.0: Boot video device
[ 0.359715] cpufreq-nforce2: No nForce2 chipset.
[ 0.359758] Scanning for low memory corruption every 60 seconds
[ 0.359933] audit: initializing netlink socket (disabled)
[ 0.359953] type=2000 audit(1269940243.359:1): initialized
[ 0.372770] highmem bounce pool size: 64 pages
[ 0.372778] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.374836] VFS: Disk quotas dquot_6.5.2
[ 0.374930] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.375744] fuse init (API version 7.13)
[ 0.375860] msgmni has been set to 1696
[ 0.376197] alg: No test for stdrng (krng)
[ 0.376212] io scheduler noop registered
[ 0.376215] io scheduler anticipatory registered
[ 0.376218] io scheduler deadline registered
[ 0.376280] io scheduler cfq registered (default)
[ 0.376495] alloc irq_desc for 24 on node -1
[ 0.376498] alloc kstat_irqs on node -1
[ 0.376514] pcieport 0000:00:06.0: irq 24 for MSI/MSI-X
[ 0.376526] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.376677] alloc irq_desc for 25 on node -1
[ 0.376679] alloc kstat_irqs on node -1
[ 0.376689] pcieport 0000:00:1f.0: irq 25 for MSI/MSI-X
[ 0.376701] pcieport 0000:00:1f.0: setting latency timer to 64
[ 0.376788] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.376818] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.376951] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.376956] ACPI: Power Button [PWRB]
[ 0.377032] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.377035] ACPI: Power Button [PWRF]
[ 0.377103] fan PNP0C0B:00: registered as cooling_device0
[ 0.377110] ACPI: Fan [FAN] (on)
[ 0.377440] processor LNXCPU:00: registered as cooling_device1
[ 0.377747] ACPI: SSDT 6fff77c0 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 0.377997] processor LNXCPU:01: registered as cooling_device2
[ 0.381338] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.381352] ACPI: Thermal Zone [THRM] (21 C)
[ 0.381613] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.381623] ACPI: Thermal Zone [SYST] (21 C)
[ 0.383712] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.383827] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.383932] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.384385] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.384543] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.386001] brd: module loaded
[ 0.386629] loop: module loaded
[ 0.386758] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.387073] sata_sis 0000:00:05.0: version 1.0
[ 0.387101] alloc irq_desc for 17 on node -1
[ 0.387104] alloc kstat_irqs on node -1
[ 0.387115] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.387122] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[ 0.387171] sata_sis 0000:00:05.0: setting latency timer to 64
[ 0.387354] isapnp: Scanning for PnP cards...
[ 0.392878] scsi0 : sata_sis
[ 0.393082] scsi1 : sata_sis
[ 0.393768] ata1: PATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xf900 irq 17
[ 0.393771] ata2: PATA max UDMA/133 cmd 0xfb00 ctl 0xfa00 bmdma 0xf908 irq 17
[ 0.394393] pata_sis 0000:00:02.5: version 0.5.2
[ 0.394416] alloc irq_desc for 16 on node -1
[ 0.394418] alloc kstat_irqs on node -1
[ 0.394430] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.438199] scsi2 : pata_sis
[ 0.438456] scsi3 : pata_sis
[ 0.439100] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[ 0.439104] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[ 0.439621] Fixed MDIO Bus: probed
[ 0.439666] PPP generic driver version 2.4.2
[ 0.439771] tun: Universal TUN/TAP device driver, 1.6
[ 0.439773] tun: (C) 1999-2004 Max Krasnyansky
[ 0.439905] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.439942] alloc irq_desc for 22 on node -1
[ 0.439945] alloc kstat_irqs on node -1
[ 0.439956] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.439985] ehci_hcd 0000:00:03.3: setting latency timer to 64
[ 0.439990] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 0.440031] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 0.440088] ehci_hcd 0000:00:03.3: irq 22, io mem 0xfdffd000
[ 0.441422] Freeing initrd memory: 7447k freed
[ 0.451520] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 0.451830] usb usb1: configuration #1 chosen from 1 choice
[ 0.451872] hub 1-0:1.0: USB hub found
[ 0.451892] hub 1-0:1.0: 8 ports detected
[ 0.451993] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.452054] alloc irq_desc for 20 on node -1
[ 0.452057] alloc kstat_irqs on node -1
[ 0.452069] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.452104] ohci_hcd 0000:00:03.0: setting latency timer to 64
[ 0.452108] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 0.452160] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 0.452192] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfdfff000
[ 0.509576] usb usb2: configuration #1 chosen from 1 choice
[ 0.509610] hub 2-0:1.0: USB hub found
[ 0.509619] hub 2-0:1.0: 4 ports detected
[ 0.509679] alloc irq_desc for 21 on node -1
[ 0.509682] alloc kstat_irqs on node -1
[ 0.509689] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.509702] ohci_hcd 0000:00:03.1: setting latency timer to 64
[ 0.509706] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 0.509748] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 0.509770] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfdffe000
[ 0.565568] usb usb3: configuration #1 chosen from 1 choice
[ 0.565601] hub 3-0:1.0: USB hub found
[ 0.565612] hub 3-0:1.0: 4 ports detected
[ 0.565679] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.565831] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.566216] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.566224] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.566330] mice: PS/2 mouse device common for all mice
[ 0.566471] rtc_cmos 00:04: RTC can wake from S4
[ 0.566531] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.566556] rtc0: alarms up to one year, 242 bytes nvram, hpet irqs
[ 0.566691] device-mapper: uevent: version 1.0.3
[ 0.571048] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.590161] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.614563] device-mapper: multipath: version 1.1.0 loaded
[ 0.614568] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.614739] EISA: Probing bus 0 at eisa.0
[ 0.614746] Cannot allocate resource for EISA slot 1
[ 0.614757] Cannot allocate resource for EISA slot 4
[ 0.614775] EISA: Detected 0 cards.
[ 0.614874] cpuidle: using governor ladder
[ 0.614876] cpuidle: using governor menu
[ 0.615501] TCP cubic registered
[ 0.615697] NET: Registered protocol family 10
[ 0.616362] lo: Disabled Privacy Extensions
[ 0.616808] NET: Registered protocol family 17
[ 0.618293] Using IPI No-Shortcut mode
[ 0.618453] PM: Resume from disk failed.
[ 0.618469] registered taskstats version 1
[ 0.618774] Magic number: 2:804:172
[ 0.618869] rtc_cmos 00:04: setting system clock to 2010-03-30 09:10:44 UTC (1269940244)
[ 0.618873] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.618875] EDD information not available.
[ 0.643333] ata1.00: ATA-7: ST3250820AS, 3.AAD, max UDMA/133
[ 0.643337] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.739727] ata1.00: configured for UDMA/133
[ 0.745360] isapnp: No Plug & Play device found
[ 0.745513] scsi 0:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5
[ 0.745678] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.745701] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.745749] sd 0:0:0:0: [sda] Write Protect is off
[ 0.745752] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.745781] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.745968] sda: sda1 sda2 < sda5 >
[ 0.809250] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.899862] ata2.01: NODEV after polling detection
[ 0.907970] ata2.00: ATAPI: HL-DT-ST DVDRAM_GSA-H60N, CA01, max UDMA/100
[ 0.924036] ata2.00: configured for UDMA/100
[ 0.929242] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM_GSA-H60N CA01 PQ: 0 ANSI: 5
[ 0.940955] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.940960] Uniform CD-ROM driver Revision: 3.20
[ 0.941095] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.941160] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.941219] ata4: port disabled. ignoring.
[ 0.941244] Freeing unused kernel memory: 660k freed
[ 0.941723] Write protecting the kernel text: 4748k
[ 0.941780] Write protecting the kernel read-only data: 1884k
[ 0.962708] udev: starting version 151
[ 1.076523] alloc irq_desc for 19 on node -1
[ 1.076528] alloc kstat_irqs on node -1
[ 1.076540] ohci1394 0000:00:0c.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.076548] ohci1394 0000:00:0c.0: setting latency timer to 64
[ 1.128764] FDC 0 is a post-1991 82077
[ 1.132127] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdffb000-fdffb7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.236052] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 1.315528] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 1.460648] usb 3-1: configuration #1 chosen from 1 choice
[ 1.764049] usb 3-2: new low speed USB device using ohci_hcd and address 3
[ 1.979622] usb 3-2: configuration #1 chosen from 1 choice
[ 2.292061] usb 3-3: new full speed USB device using ohci_hcd and address 4
[ 2.404316] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00016c2000479657]
[ 2.507597] usb 3-3: configuration #1 chosen from 1 choice
[ 8.124670] udev: starting version 151
[ 8.138710] Adding 5278712k swap on /dev/sda5. Priority:-1 extents:1 across:5278712k
[ 8.183261] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.276636] Linux agpgart interface v0.103
[ 8.294432] vga16fb: initializing
[ 8.294440] vga16fb: mapped to 0xc00a0000
[ 8.294548] fb0: VGA16 VGA frame buffer device
[ 8.296082] sis190 Gigabit Ethernet driver 1.3 loaded.
[ 8.296110] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 8.296127] sis190 0000:00:04.0: setting latency timer to 64
[ 8.296147] 0000:00:04.0: Read MAC address from EEPROM
[ 8.296150] 0000:00:04.0: Error EEPROM read 0.
[ 8.296153] 0000:00:04.0: Read MAC address from APC.
[ 8.331367] parport_pc 00:0a: reported by Plug and Play ACPI
[ 8.331415] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.344070] 0000:00:04.0: unknown PHY 0x1c:0xc910 transceiver at address 1
[ 8.447791] lp0: using parport0 (interrupt-driven).
[ 8.467343] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2404
[ 8.467378] usbcore: registered new interface driver usblp
[ 8.480518] Initializing USB Mass Storage driver...
[ 8.484733] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 8.484761] acer-wmi: No or unsupported WMI interface, unable to load
[ 8.491834] usbcore: registered new interface driver hiddev
[ 8.498656] input: MOUSE SYSTEM U+P RF Mouse Receiver as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/input/input4
[ 8.498829] generic-usb 0003:0458:0027.0001: input,hidraw0: USB HID v1.10 Mouse [MOUSE SYSTEM U+P RF Mouse Receiver] on usb-0000:00:03.1-2/input0
[ 8.498883] usbcore: registered new interface driver usbhid
[ 8.498887] usbhid: v2.6:USB HID core driver
[ 8.506570] scsi4 : SCSI emulation for USB Mass Storage devices
[ 8.516681] usbcore: registered new interface driver usb-storage
[ 8.516688] USB Mass Storage support registered.
[ 8.517204] usb-storage: device found at 4
[ 8.517207] usb-storage: waiting for device to settle before scanning
[ 8.535360] ppdev: user-space parallel port driver
[ 8.634782] Console: switching to colour frame buffer device 80x30
[ 8.817449] type=1505 audit(1269954652.697:2): operation="profile_load" pid=603 name="/sbin/dhclient3"
[ 8.818310] type=1505 audit(1269954652.697:3): operation="profile_load" pid=603 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 8.818782] type=1505 audit(1269954652.697:4): operation="profile_load" pid=603 name="/usr/lib/connman/scripts/dhclient-script"
[ 8.912040] 0000:00:04.0: Using transceiver at address 1 as default.
[ 8.944984] 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8444000 (IRQ: 19), 00:1c:25:4e:85:72
[ 8.944988] eth0: RGMII mode.
[ 8.944995] eth0: Enabling Auto-negotiation.
[ 8.976131] agpgart-sis 0000:00:00.0: SiS chipset [1039/0671]
[ 8.981961] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 8.982043] alloc irq_desc for 18 on node -1
[ 8.982046] alloc kstat_irqs on node -1
[ 8.982058] HDA Intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.982109] HDA Intel 0000:00:0f.0: setting latency timer to 64
[ 9.006856] type=1505 audit(1269954652.885:5): operation="profile_load" pid=705 name="/usr/share/gdm/guest-session/Xsession"
[ 9.009581] type=1505 audit(1269954652.889:6): operation="profile_replace" pid=706 name="/sbin/dhclient3"
[ 9.010529] type=1505 audit(1269954652.889:7): operation="profile_replace" pid=706 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 9.011065] type=1505 audit(1269954652.889:8): operation="profile_replace" pid=706 name="/usr/lib/connman/scripts/dhclient-script"
[ 9.012992] type=1505 audit(1269954652.893:9): operation="profile_load" pid=708 name="/usr/bin/evince"
[ 9.016179] type=1505 audit(1269954652.897:10): operation="profile_load" pid=710 name="/usr/lib/cups/backend/cups-pdf"
[ 9.017208] type=1505 audit(1269954652.897:11): operation="profile_load" pid=710 name="/usr/sbin/cupsd"
[ 9.052491] hda_codec: ALC1200: BIOS auto-probing.
[ 9.054017] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.0/input/input5
[ 9.303585] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.762250] usb 3-1: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 13.167263] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 13.518076] usb-storage: device scan complete
[ 13.525043] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 13.532048] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 13.539040] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 13.546037] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 13.546653] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 13.546819] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 13.547632] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 13.547855] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 13.582035] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 13.857006] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 13.868005] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 14.100996] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 19.332039] eth0: mii ext = 0000.
[ 19.356024] eth0: mii lpa=41e1 adv=01e1 exp=0007.
[ 19.356029] eth0: link on 100 Mbps Full Duplex mode.
[ 19.356302] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.736025] eth0: mii ext = 0000.
[ 19.760021] eth0: mii lpa=41e1 adv=01e1 exp=0005.
[ 19.760026] eth0: link on 100 Mbps Full Duplex mode.
[ 29.932013] eth0: no IPv6 routers present
sam@sam-desktop:~$ sudo lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02)
00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03)
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller
00:1f.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)
sam@sam-desktop:~$