Solving connection to Internet

*-*-* Hello, I am new in the forum and environment linux, an immense contribution, Many Graces, for your good impulses for the improvement of this great field. I walk finding the way of connecting the machine to Internet since today I deal a seminar of computer safety, We come being employed the distribution BackTrack at which like that I have found the following difficulty. I have a hanging work now in vacations and have not managed to begin. excuse me, but I have searched everywhere and do not find the form. My connection: Type pppoe Modem: Ethernet Use: the command pppoe-setup I assign direction the card of network: ifconfig eth0 x.x.x.x up I assign the door of link: route add default gw x.x.x.x After forming Typing all the information, I execute pppoe-start but it is conquered the time of attempt for the connection. Gentlemen, I check the corresponding files, which store user's name, password, DNS. Everything is like well it must be. The interfaz eth0 is recognized. In a moment I connected from the LiveCD, now not of the LiveCD it works. Estimated main. Immense gratefulnesses for whom they could help me. A Great Greeting. Successes and Congratulations. *-*-*

*-*-* Finally!!! Thank you, I Am in Colombia, so of this form today I find a solution. Thanks to Gideon26 in Ubuntu's forum. [URL = " http: // ubuntuforums.org/showthread.php? T=426944 "] In his(her,your) Post [/URL] has Written a small tutorial that has served for the distribution BackTrack that today I use doing a few modifications in this one. Configuration Internet BackTrack connection pppoe: 1. To assign IP to the Plate of Network: ifconfig ethX x.x.x.x 2. To unload the Plugin: rp-pppoe-3.8.tar.gz 3. To install the Plugin: 4. * tar-zxvf rp-pppoe-3.8.tar.gz 4. 5. * CD rp-pppoe-3.8 5. 6. * ./go 7. To deposit all the needed information given by the ISP. 6. To create a file with the name adsl in the directory /etc/ppp/peers and to stick in him the following text: # example configuration for the kernel space PPP over Ethernet driver # # See the manual page pppd( for information on all the options. # MUST CHANGE: replace myusername@realm with the PPP login name given to # your by your provider. # There should be a matching entry with the password in /etc/ppp/pap-secrets # and/or /etc/ppp/chap-secrets. user "UsuarioAsignadoPorISP" # Load the PPPoE plugin. plugin rp-pppoe.so # Ethernet interface to which the modem is connected. ethX # Assumes that your IP address is allocated dynamically by the ISP. noipdefault # Try to get the name server addresses from the ISP. usepeerdns # Use this connection as the default route. defaultroute # Makes pppd "dial again" when the connection is lost. persist # Do not ask the remote to authenticate. noauth IT NOTICES: in the parameter user the Internet user goes, ej: "mycount@sky-chrg", and in the ethX X it is equivalent to the value of the interfaz of the Plate of network. Do not forget to guard and go out. 7. # pppd call adsl... I list Connection !!! Well. But I have the following doubt, for which if someone can help me to resolve I it am grateful enormously: When I restart the machine I have to do the same procedure, What I do in order that when the machine loads, immediately she remains connected. I do not deal why it is necessary to do again the whole procedure when all the information remains stored in /etc/ppp/pppoe.conf, /etc/resolv.conf, /etc/ppp/pap-secrets, and, /etc/ppp/chap-secrets Good time and Congratulations! *-*-* [Modified by: GenofGod on December 20, 2007 09:40 PM]

and thanks you.