Linux.com

Home Linux Community Forums Linux Distributions openSUSE How to connect internet in open suse??

How to connect internet in open suse??

Link to this post 18 Dec 09

eth0 Link encap:Ethernet HWaddr 00:E0:20:03:FF:8C
inet addr:192.168.1.2
Bcast:192.168.1.255
Mask:255.255.255.0
inet6 addr: fe80::2e0:20ff:fe03:ff8c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:62 errors:0 dropped:0 overruns:0 carrier:11
collisions:0 txqueuelen:1000
RX bytes:1568 (1.5 Kb) TX bytes:7997 (7.8 Kb)
Interrupt:21 Memory:dfdfff00-dfdfffff
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:62 errors:0 dropped:0 overruns:0 frame:0
TX packets:62 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3500 (3.4 Kb) TX bytes:3500 (3.4 Kb)

Link to this post 18 Dec 09

00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
03:01.0 Ethernet controller: Hangzhou Silan Microelectronics Co., Ltd. Device 2031 (rev 01)
03:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
03:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)

Link to this post 18 Dec 09

Your output from ifconfig is showing that opensuse correctly detected your ethernet card and is using it, it was given the address 192.168.1.2 from your router. So the operating system itself is correctly connected to your router.

I think that the issue is with your router.
Can you please post the ouput of the following command here so we can see how the communication is between your computer and router.


ping -c 4 192.168.1.1


ping -c 4 www.google.com

Link to this post 18 Dec 09

The ping statistics for the first command---

PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data
64 bytes from 192.168.1.1: icmp_seq=1 ttl=128 time=4.77 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=128 time=1.96 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=128 time=2.09 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=128 time=2.36 ms
--- 192.168.1.1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3012ms
rtt min/avg/max/mdev = 1.965/2.796/4.770/1.149 ms

For the second command, it said unknown host.

This time i configured the DSL settings and selected > connect to the internet manually.
Now i m not finding the application to connect it.
:(
---------------------------------------------
I would like to ask one more question here.
A couple of days ago, my windows XP got corrupted so i formatted the C drive and reinstalled it.
At that time,I had installed ubuntu along with it which got lost and was overwritten by the windows setup.
Is there any way to install XP without affecting ubuntu in one way or other?
Or is it possible to retrieve ubuntu after installing windows?

Link to this post 18 Dec 09

I do not know what settings you modified to tell it to connect manually, an automatic connection is what you need. Hopefully a opensuse user can step up and help you to find those settings again and correct them.

So from the output your network connection is configured correctly, you can talk to your router. and Since you system is connected to a DSL modem that is considered a local network, you will not need to modify an preferences in reference to a DSL, you only need to tell your system to automatically detect all network settings. So some settings are incorrect wither in your installation (default gateway or DNS server) or in the router/modem itself.
As for the windows problem, the potential to retrieve ubuntu is based upon the question if your windows installation overwrote the ubuntu partition. If windows did not overwrite the partition then you should be able to use an ubuntu liveCD to chroot into your installation and reinstall the grub bootloader to the mbr. I cannot give you instruction because depending on the version of ubuntu you have installed it chould be grub (ubunutu 9.04 and less) or grub2 (ubuntu 9.10). I would recommend doing a google search for those instructions. For future reference whenever you install windows it overwrites the mbr and whatever bootloader you have installed, if you plan to keep using windows and reinstalling it you might want to print the grub recovery instructions.

Link to this post 19 Dec 09

:woohoo:
I have connected internet to opensuse with kinternet

But this time i m scared that it is updating its packages because the system monitor is showing rapidly increasing bytes recieved,
Now what to do and what to configure??
I have unchecked a few auto-updates but its not working.

Who we are ?

The Linux Foundation is a non-profit consortium dedicated to the growth of Linux.

More About the foundation...

Frequent Questions

Join / Linux Training / Board