Linux.com

jojocompas

jojocompas

  • Linux.com Member
  • Posts: 26
  • Member Since: 14 May 09
  • Last Logged In: 04 Feb 13

Latest Posts

Posted by
Topic
Post Preview
Posted
  • jojocompas
    Repostories Fails to do update (Ubuntu 10.10)
    I'm using Ubuntu 10.10 maverick, the Repositories fails to do the Automatic update nor the manual update Error: Failed to download repository information W:Failed to fetch http://extras.ubuntu.com/ubuntu/dists/maverick/main/binary-i386/Packages.gz 404 Not Found , W:Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/maverick-security/main/source/Sources.gz 404 Not Found [IP: 91.189.92.202 80] , W:Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/maverick-security/restricted/source/Sources.gz 404 Not Found [IP: 91.189.92.202 80] , W:Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/maverick-security/universe/source/Sources.gz 404 Not Found [IP: 91.189.92.202 80] , W:Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/maverick-security/multiverse/source/Sources.gz 404 Not Found [IP: 91.189.92.202 80] , W:Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/maverick-security , E:Some index files failed to download, they have been ignored, or old ones used instead.
    Link to this post 04 Feb 13

    I'm using Ubuntu 10.10 maverick, the Repositories fails to do the Automatic update nor the manual update
    Error: Failed to download repository information

    W:Failed to fetch http://extras.ubuntu.com/ubuntu/dists/maverick/main/binary-i386/Packages.gz 404 Not Found
    , W:Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/maverick-security/main/source/Sources.gz 404 Not Found [IP: 91.189.92.202 80]
    , W:Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/maverick-security/restricted/source/Sources.gz 404 Not Found [IP: 91.189.92.202 80]
    , W:Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/maverick-security/universe/source/Sources.gz 404 Not Found [IP: 91.189.92.202 80]
    , W:Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/maverick-security/multiverse/source/Sources.gz 404 Not Found [IP: 91.189.92.202 80]
    , W:Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/maverick-security
    , E:Some index files failed to download, they have been ignored, or old ones used instead.

  • jojocompas
    RE: Mount of filesystem fails - Ubuntu won't boot
    After attempting a recovery that fails, it asked me to run "fsck" and now everything just works fine!
    Link to this post 18 Aug 10

    After attempting a recovery that fails, it asked me to run "fsck" and now everything just works fine!

  • jojocompas
    Mount of filesystem fails - Ubuntu won't boot
    I am using Ubuntu 9.04, I am having this error "Mount of filesystem fails, Maintenance Shell will now be started, Control-D will terminate this Shell and Re-Try, $root@jojocompas:~# " My question: How do I get my system to boot, it has been sitting there in the Shell, it doesn't seem to be doing anything at all. I have tried the recovery but each time it sends the system to this Shell. Do I need to do something to start up the Shell?
    Link to this post 18 Aug 10

    I am using Ubuntu 9.04, I am having this error "Mount of filesystem fails, Maintenance Shell will now be started, Control-D will terminate this Shell and Re-Try, $root@jojocompas:~# "

    My question: How do I get my system to boot, it has been sitting there in the Shell, it doesn't seem to be doing anything at all. I have tried the recovery but each time it sends the system to this Shell. Do I need to do something to start up the Shell?

  • jojocompas
    Drives not mounted when booting
    I have 2 disk drives that were working fine before and then after a reboot I can't access these drives anymore, I tried to manually mount the drives, I have error message 'unable to resolve host homepc' The only thing I have done before is uninstalled samba and then I have reinstalled samba and I've redone the samba.conf file, still can't see my shared files and the drives are not being mounted when I boot the pc Under disk utility I still see the drives, and filesystem is installed on a partition of one of the drives and works fine but can't access the other partition and the other drive These drives on a local computer can anyone help me with this? I am using Ubuntu 9.10? Thanks Fdisk output Device Boot Start End Blocks Id System /dev/sda1 * 1 12336 99088888+ 83 Linux /dev/sda2 12337 24129 94727272+ c W95 FAT32 (LBA) /dev/sda3 24130 24792 5325547+ 82 Linux swap / Solaris Fstab # /etc/fstab: static file system information. # # proc /proc proc defaults 0 0 # /dev/sda1 UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e / ext3 defaults,errors=remount-ro 0 1 # /dev/sda3 UUID=49fe796c-7816-4e1c-9c59-8cacd90db7f8 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec 0 0
    Link to this post 06 Jan 10

    I have 2 disk drives that were working fine before and then after a reboot I can't access these drives anymore, I tried to manually mount the drives, I have error message 'unable to resolve host homepc'
    The only thing I have done before is uninstalled samba and then I have reinstalled samba and I've redone the samba.conf file, still can't see my shared files and the drives are not being mounted when I boot the pc
    Under disk utility I still see the drives, and filesystem is
    installed on a partition of one of the drives and works fine but can't
    access the other partition and the other drive

    These drives on a local computer

    can anyone help me with this? I am using Ubuntu 9.10?
    Thanks

    Fdisk output

    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 12336 99088888+ 83 Linux
    /dev/sda2 12337 24129 94727272+ c W95 FAT32 (LBA)
    /dev/sda3 24130 24792 5325547+ 82 Linux swap / Solaris

    Fstab

    # /etc/fstab: static file system information.
    #
    # <file system> <mount point> <type> <options> <dump> <pass>
    proc /proc proc defaults 0 0
    # /dev/sda1
    UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e / ext3 defaults,errors=remount-ro 0 1
    # /dev/sda3
    UUID=49fe796c-7816-4e1c-9c59-8cacd90db7f8 none swap sw 0 0
    /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec 0 0
    /dev/fd0 /media/floppy0 auto rw,user,noauto,exec 0 0

  • jojocompas
    RE: Unable to resolve host jojoubtwirdskt
    a) Are these drives on a local computer b) First I uninstalled all samba files in synaptic package manager and I've redone the samba.conf file c) Under disk utility I still see the drives, and filesystem is installed on a partition of one of the drives and works fine but can't access the other partition and the other drive Fdisk output Device Boot Start End Blocks Id System /dev/sda1 * 1 12336 99088888+ 83 Linux /dev/sda2 12337 24129 94727272+ c W95 FAT32 (LBA) /dev/sda3 24130 24792 5325547+ 82 Linux swap / Solaris Fstab # /etc/fstab: static file system information. # # proc /proc proc defaults 0 0 # /dev/sda1 UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e / ext3 defaults,errors=remount-ro 0 1 # /dev/sda3 UUID=49fe796c-7816-4e1c-9c59-8cacd90db7f8 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec 0 0 menu.lst # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) hiddenmenu # Pretty colours #color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,0) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions=quiet splash ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## specify if running in Xen domU or have grub detect automatically ## update-grub will ignore non-xen kernels when running in domU and vice versa ## e.g. indomU=detect ## indomU=true ## indomU=false # indomU=detect ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 9.10, kernel 2.6.31-17-generic root (hd0,0) kernel /boot/vmlinuz-2.6.31-17-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash initrd /boot/initrd.img-2.6.31-17-generic quiet title Ubuntu 9.10, kernel 2.6.31-17-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.31-17-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single initrd /boot/initrd.img-2.6.31-17-generic title Ubuntu 9.10, kernel 2.6.31-16-generic root (hd0,0) kernel /boot/vmlinuz-2.6.31-16-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash initrd /boot/initrd.img-2.6.31-16-generic quiet title Ubuntu 9.10, kernel 2.6.31-16-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.31-16-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single initrd /boot/initrd.img-2.6.31-16-generic title Ubuntu 9.10, kernel 2.6.31-15-generic root (hd0,0) kernel /boot/vmlinuz-2.6.31-15-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash initrd /boot/initrd.img-2.6.31-15-generic quiet title Ubuntu 9.10, kernel 2.6.31-15-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.31-15-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single initrd /boot/initrd.img-2.6.31-15-generic title Ubuntu 9.10, kernel 2.6.31-14-generic root (hd0,0) kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash initrd /boot/initrd.img-2.6.31-14-generic quiet title Ubuntu 9.10, kernel 2.6.31-14-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single initrd /boot/initrd.img-2.6.31-14-generic title Ubuntu 9.10, kernel 2.6.27-15-generic root (hd0,0) kernel /boot/vmlinuz-2.6.27-15-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash initrd /boot/initrd.img-2.6.27-15-generic quiet title Ubuntu 9.10, kernel 2.6.27-15-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.27-15-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single initrd /boot/initrd.img-2.6.27-15-generic title Ubuntu 9.10, kernel 2.6.24-16-generic root (hd0,0) kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash initrd /boot/initrd.img-2.6.24-16-generic quiet title Ubuntu 9.10, kernel 2.6.24-16-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single initrd /boot/initrd.img-2.6.24-16-generic title Ubuntu 9.10, kernel 2.6.22-14-generic root (hd0,0) kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash initrd /boot/initrd.img-2.6.22-14-generic quiet title Ubuntu 9.10, kernel 2.6.22-14-generic (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single initrd /boot/initrd.img-2.6.22-14-generic title Ubuntu 9.10, memtest86+ root (hd0,0) kernel /boot/memtest86+.bin quiet ### END DEBIAN AUTOMAGIC KERNELS LIST
    Link to this post 01 Jan 10

    a) Are these drives on a local computer
    b) First I uninstalled all samba files in synaptic package manager and I've
    redone the samba.conf file
    c) Under disk utility I still see the drives, and filesystem is
    installed on a partition of one of the drives and works fine but can't
    access the other partition and the other drive
    Fdisk output
    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 12336 99088888+ 83 Linux
    /dev/sda2 12337 24129 94727272+ c W95 FAT32 (LBA)
    /dev/sda3 24130 24792 5325547+ 82 Linux swap / Solaris

    Fstab
    # /etc/fstab: static file system information.
    #
    # <file system> <mount point> <type> <options> <dump> <pass>
    proc /proc proc defaults 0 0
    # /dev/sda1
    UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e / ext3 defaults,errors=remount-ro 0 1
    # /dev/sda3
    UUID=49fe796c-7816-4e1c-9c59-8cacd90db7f8 none swap sw 0 0
    /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec 0 0
    /dev/fd0 /media/floppy0 auto rw,user,noauto,exec 0 0

    menu.lst
    # menu.lst - See: grub(8), info grub, update-grub(8)
    # grub-install(8), grub-floppy(8),
    # grub-md5-crypt, /usr/share/doc/grub
    # and /usr/share/doc/grub-doc/.

    ## default num
    # Set the default entry to the entry number NUM. Numbering starts from 0, and
    # the entry number 0 is the default if the command is not used.
    #
    # You can specify 'saved' instead of a number. In this case, the default entry
    # is the entry saved with the command 'savedefault'.
    # WARNING: If you are using dmraid do not use 'savedefault' or your
    # array will desync and will not let you boot your system.
    default 0

    ## timeout sec
    # Set a timeout, in SEC seconds, before automatically booting the default entry
    # (normally the first entry defined).
    timeout 3

    ## hiddenmenu
    # Hides the menu by default (press ESC to see the menu)
    hiddenmenu

    # Pretty colours
    #color cyan/blue white/blue

    ## password ['--md5'] passwd
    # If used in the first section of a menu file, disable all interactive editing
    # control (menu entry editor and command-line) and entries protected by the
    # command 'lock'
    # e.g. password topsecret
    # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
    # password topsecret

    #
    # examples
    #
    # title Windows 95/98/NT/2000
    # root (hd0,0)
    # makeactive
    # chainloader +1
    #
    # title Linux
    # root (hd0,1)
    # kernel /vmlinuz root=/dev/hda2 ro
    #

    #
    # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

    ### BEGIN AUTOMAGIC KERNELS LIST
    ## lines between the AUTOMAGIC KERNELS LIST markers will be modified
    ## by the debian update-grub script except for the default options below

    ## DO NOT UNCOMMENT THEM, Just edit them to your needs

    ## ## Start Default Options ##
    ## default kernel options
    ## default kernel options for automagic boot options
    ## If you want special options for specific kernels use kopt_x_y_z
    ## where x.y.z is kernel version. Minor versions can be omitted.
    ## e.g. kopt=root=/dev/hda1 ro
    ## kopt_2_6_8=root=/dev/hdc1 ro
    ## kopt_2_6_8_2_686=root=/dev/hdc2 ro
    # kopt=root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro

    ## default grub root device
    ## e.g. groot=(hd0,0)
    # groot=(hd0,0)

    ## should update-grub create alternative automagic boot options
    ## e.g. alternative=true
    ## alternative=false
    # alternative=true

    ## should update-grub lock alternative automagic boot options
    ## e.g. lockalternative=true
    ## lockalternative=false
    # lockalternative=false

    ## additional options to use with the default boot option, but not with the
    ## alternatives
    ## e.g. defoptions=vga=791 resume=/dev/hda5
    # defoptions=quiet splash

    ## should update-grub lock old automagic boot options
    ## e.g. lockold=false
    ## lockold=true
    # lockold=false

    ## Xen hypervisor options to use with the default Xen boot option
    # xenhopt=

    ## Xen Linux kernel options to use with the default Xen boot option
    # xenkopt=console=tty0

    ## altoption boot targets option
    ## multiple altoptions lines are allowed
    ## e.g. altoptions=(extra menu suffix) extra boot options
    ## altoptions=(recovery) single
    # altoptions=(recovery mode) single

    ## controls how many kernels should be put into the menu.lst
    ## only counts the first occurence of a kernel, not the
    ## alternative kernel options
    ## e.g. howmany=all
    ## howmany=7
    # howmany=all

    ## specify if running in Xen domU or have grub detect automatically
    ## update-grub will ignore non-xen kernels when running in domU and vice versa
    ## e.g. indomU=detect
    ## indomU=true
    ## indomU=false
    # indomU=detect

    ## should update-grub create memtest86 boot option
    ## e.g. memtest86=true
    ## memtest86=false
    # memtest86=true

    ## should update-grub adjust the value of the default booted system
    ## can be true or false
    # updatedefaultentry=false

    ## should update-grub add savedefault to the default options
    ## can be true or false
    # savedefault=false

    ## ## End Default Options ##

    title Ubuntu 9.10, kernel 2.6.31-17-generic
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.31-17-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash
    initrd /boot/initrd.img-2.6.31-17-generic
    quiet

    title Ubuntu 9.10, kernel 2.6.31-17-generic (recovery mode)
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.31-17-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single
    initrd /boot/initrd.img-2.6.31-17-generic

    title Ubuntu 9.10, kernel 2.6.31-16-generic
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.31-16-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash
    initrd /boot/initrd.img-2.6.31-16-generic
    quiet

    title Ubuntu 9.10, kernel 2.6.31-16-generic (recovery mode)
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.31-16-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single
    initrd /boot/initrd.img-2.6.31-16-generic

    title Ubuntu 9.10, kernel 2.6.31-15-generic
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.31-15-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash
    initrd /boot/initrd.img-2.6.31-15-generic
    quiet

    title Ubuntu 9.10, kernel 2.6.31-15-generic (recovery mode)
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.31-15-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single
    initrd /boot/initrd.img-2.6.31-15-generic

    title Ubuntu 9.10, kernel 2.6.31-14-generic
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash
    initrd /boot/initrd.img-2.6.31-14-generic
    quiet

    title Ubuntu 9.10, kernel 2.6.31-14-generic (recovery mode)
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single
    initrd /boot/initrd.img-2.6.31-14-generic

    title Ubuntu 9.10, kernel 2.6.27-15-generic
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.27-15-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash
    initrd /boot/initrd.img-2.6.27-15-generic
    quiet

    title Ubuntu 9.10, kernel 2.6.27-15-generic (recovery mode)
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.27-15-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single
    initrd /boot/initrd.img-2.6.27-15-generic

    title Ubuntu 9.10, kernel 2.6.24-16-generic
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash
    initrd /boot/initrd.img-2.6.24-16-generic
    quiet

    title Ubuntu 9.10, kernel 2.6.24-16-generic (recovery mode)
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single
    initrd /boot/initrd.img-2.6.24-16-generic

    title Ubuntu 9.10, kernel 2.6.22-14-generic
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro quiet splash
    initrd /boot/initrd.img-2.6.22-14-generic
    quiet

    title Ubuntu 9.10, kernel 2.6.22-14-generic (recovery mode)
    root (hd0,0)
    kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=192d370e-9d47-4f9d-bae2-65b7e8834f9e ro single
    initrd /boot/initrd.img-2.6.22-14-generic

    title Ubuntu 9.10, memtest86+
    root (hd0,0)
    kernel /boot/memtest86+.bin
    quiet

    ### END DEBIAN AUTOMAGIC KERNELS LIST

  • jojocompas
    Unable to resolve host jojoubtwirdskt
    I have 2 disk drives that were working fine before and then after a reboot I can't access these drives anymore, I tried to manually mount the drives, I have error message 'unable to resolve host homepc' The only thing I have done before is uninstalled samba and then I have reinstalled samba, although I still can't see my shared files can anyone help me with this? I am using Ubuntu 9.10
    Link to this post 01 Jan 10

    I have 2 disk drives that were working fine before and then after a reboot I can't access these drives anymore, I tried to manually mount the drives, I have error message 'unable to resolve host homepc'
    The only thing I have done before is uninstalled samba and then I have reinstalled samba, although I still can't see my shared files
    can anyone help me with this? I am using Ubuntu 9.10

  • jojocompas
    E-Commerce Web Page
    I would like to build an E-commerce web page, can anyone give me some advice on how to proceed with this. What's the most convenient web tools to use and some tips on how to install these tools on my Ubuntu 9.10 thanks
    Link to this post 02 Dec 09

    I would like to build an E-commerce web page, can anyone give me some advice on how to proceed with this. What's the most convenient web tools to use and some tips on how to install these tools on my Ubuntu 9.10
    thanks

  • jojocompas
    RE: Wireless-N USB or PCMCIA adapters that works?
    I agree with you, never change a good system unless you have to. I am also using Ubuntu 9.10 and I was tempted to keep the menu.lst but I backed it up instead just b4 I upgraded to 9.10. It's working fine on my PC, I had sound, screen resolution problems after the installation. I reported the issue to Ubuntu support and I was connected to https://launchpad.net/ and the nex thing I know after a reboot everything is working fine.
    Link to this post 10 Nov 09

    I agree with you, never change a good system unless you have to.
    I am also using Ubuntu 9.10 and I was tempted to keep the menu.lst but I backed it up instead just b4 I upgraded to 9.10. It's working fine on my PC, I had sound, screen resolution problems after the installation. I reported the issue to Ubuntu support and I was connected to https://launchpad.net/ and the nex thing I know after a reboot everything is working fine.

  • jojocompas
    RE: [Resolved] No write access
    I deleted the partition and recreate it with disk utility, it works fine! case solved
    Link to this post 30 Oct 09

    I deleted the partition and recreate it with disk utility, it works fine!
    case solved

  • jojocompas
    [Resolved] No write access
    Recently I had reinstalled Ubuntu 8.10 cause of a GRUB issue, I have decided to reinstalled Ubuntu and upgraded to version 9.10 I have 2 partitions on the drive and Ubuntu is installed onto the first one and the second partition I want to use it for data What I am experiencing even b4 I have upgraded to 9.10 whenever I tried to access the second partition to write a file or create a folder I keep having an error message '' Can't write to: /media/87f251f1-dbb0-4a35-8c97-de1e7470dca7 Are you sure have write access ? Questions? How do I go around this, I am the only user created on this PC?
    Link to this post 30 Oct 09

    Recently I had reinstalled Ubuntu 8.10 cause of a GRUB issue, I have decided to reinstalled Ubuntu and upgraded to version 9.10
    I have 2 partitions on the drive and Ubuntu is installed onto the first one and the second partition I want to use it for data
    What I am experiencing even b4 I have upgraded to 9.10 whenever I tried to access the second partition to write a file or create a folder I keep having an error message '' Can't write to: /media/87f251f1-dbb0-4a35-8c97-de1e7470dca7
    Are you sure have write access ?

    Questions?
    How do I go around this, I am the only user created on this PC?

Who we are ?

The Linux Foundation is a non-profit consortium dedicated to the growth of Linux.

More About the foundation...

Frequent Questions

Join / Linux Training / Board