September 30, 2016

BUI IP after new copute node

My before and after ip output is as below:
ubuntu@compute-node:~$ cat ip.before.out
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defau
lt
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP g
roup default qlen 1000
link/ether bc:76:4e:04:5d:26 brd ff:ff:ff:ff:ff:ff
inet 192.168.97.2/24 brd 192.168.97.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::be76:4eff:fe04:5d26/64 scope link
valid_lft forever preferred_lft forever
ubuntu@compute-node:~$ cat ip.after.out
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defau
lt
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 169.254.169.254/32 scope link lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP g
roup default qlen 1000
link/ether bc:76:4e:04:5d:26 brd ff:ff:ff:ff:ff:ff
inet 192.168.97.2/24 brd 192.168.97.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::be76:4eff:fe04:5d26/64 scope link
valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOW
N group default
link/ether 2a:ed:56:d4:db:69 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
ubuntu@compute-node:~$

I tried all above mentioned ip to open a browser and point it at the public IP Address of your devstack-cc node.

Nothing is working.
Which IP I should be pointing that too ?

Click Here!