This is a classic article written by Jack Wallen from the Linux.com archives. For more great SysAdmin tips and techniques check out our free intro to Linux course.

Quick question: How much space do you have left on your drives? A little or a lot? Follow up question: Do you know how to find out? If you happen to use a GUI desktop (e.g., GNOME, KDE, Mate, Pantheon, etc.), the task is probably pretty simple. But what if you’re looking at a headless server, with no GUI? Do you need to install tools for the task? The answer is a resounding no. All the necessary bits are already in place to help you find out exactly how much space remains on your drives. In fact, you have two very easy-to-use options at the ready.

In this article, I’ll demonstrate these tools. I’ll be using Elementary OS, which also includes a GUI option, but we’re going to limit ourselves to the command line. The good news is these command-line tools are readily available for every Linux distribution. On my testing system, there are a number of attached drives (both internal and external). The commands used are agnostic to where a drive is plugged in; they only care that the drive is mounted and visible to the operating system.

With that said, let’s take a look at the tools.

df

The df command is the tool I first used to discover drive space on Linux, way back in the 1990s. It’s very simple in both usage and reporting. To this day, df is my go-to command for this task. This command has a few switches but, for basic reporting, you really only need one. That command is df -H. The -H switch is for human-readable format. The output of df -H will report how much space is used, available, percentage used, and the mount point of every disk attached to your system (Figure 1).

Figure 1: The output of df -H on my Elementary OS system.

What if your list of drives is exceedingly long and you just want to view the space used on a single drive? With df, that is possible. Let’s take a look at how much space has been used up on our primary drive, located at /dev/sda1. To do that, issue the command:

df -H /dev/sda1

The output will be limited to that one drive (Figure 2).

Figure 2: How much space is on one particular drive?

You can also limit the reported fields shown in the df output. Available fields are:

source — the file system source

size — total number of blocks

used — spaced used on a drive

avail — space available on a drive

pcent — percent of used space, divided by total size

target — mount point of a drive

Let’s display the output of all our drives, showing only the size, used, and avail (or availability) fields. The command for this would be:

df -H –output=size,used,avail

The output of this command is quite easy to read (Figure 3).

Figure 3: Specifying what output to display for our drives.

The only caveat here is that we don’t know the source of the output, so we’d want to include source like so:

df -H –output=source,size,used,avail

Now the output makes more sense (Figure 4).

Figure 4: We now know the source of our disk usage.

du

Our next command is du. As you might expect, that stands for disk usage. The du command is quite different to the df command, in that it reports on directories and not drives. Because of this, you’ll want to know the names of directories to be checked. Let’s say I have a directory containing virtual machine files on my machine. That directory is /media/jack/HALEY/VIRTUALBOX. If I want to find out how much space is used by that particular directory, I’d issue the command:

du -h /media/jack/HALEY/VIRTUALBOX

The output of the above command will display the size of every file in the directory (Figure 5).

Figure 5: The output of the du command on a specific directory.

So far, this command isn’t all that helpful. What if we want to know the total usage of a particular directory? Fortunately, du can handle that task. On the same directory, the command would be:

du -sh /media/jack/HALEY/VIRTUALBOX/

Now we know how much total space the files are using up in that directory (Figure 6).

Figure 6: My virtual machine files are using 559GB of space.

You can also use this command to see how much space is being used on all child directories of a parent, like so:

du -h /media/jack/HALEY

The output of this command (Figure 7) is a good way to find out what subdirectories are hogging up space on a drive.

Figure 7: How much space are my subdirectories using?

The du command is also a great tool to use in order to see a list of directories that are using the most disk space on your system. The way to do this is by piping the output of du to two other commands: sort and head. The command to find out the top 10 directories eating space on a drive would look something like this:

du -a /media/jack | sort -n -r | head -n 10

The output would list out those directories, from largest to least offender (Figure 8).

Figure 8: Our top ten directories using up space on a drive.

Not as hard as you thought

Finding out how much space is being used on your Linux-attached drives is quite simple. As long as your drives are mounted to the Linux system, both df and du will do an outstanding job of reporting the necessary information. With df you can quickly see an overview of how much space is used on a disk and with du you can discover how much space is being used by specific directories. These two tools in combination should be considered must-know for every Linux administrator.

And, in case you missed it, I recently showed how to determine your memory usage on Linux. Together, these tips will go a long way toward helping you successfully manage your Linux servers.

The post Classic SysAdmin: How to Check Disk Space on Linux from the Command Line appeared first on Linux Foundation.

This is a classic article written by Jack Wallen from the Linux.com archives. For more great SysAdmin tips and techniques check out our free intro to Linux course.

There are certain tasks that are done so often, users take for granted just how simple they are. But then, you migrate to a new platform and those same simple tasks begin to require a small portion of your brain’s power to complete. One such task is moving files from one location to another. Sure, it’s most often considered one of the more rudimentary actions to be done on a computer. When you move to the Linux platform, however, you may find yourself asking “Now, how do I move files?”

If you’re familiar with Linux, you know there are always many routes to the same success. Moving files is no exception. You can opt for the power of the command line or the simplicity of the GUI – either way, you will get those files moved.

Let’s examine just how you can move those files about. First, we’ll examine the command line.

Command line moving

One of the issues so many users new to Linux face is the idea of having to use the command line. It can be somewhat daunting at first. Although modern Linux interfaces can help to ensure you rarely have to use this “old school” tool, there is a great deal of power you would be missing if you ignored it altogether. The command for moving files is a perfect illustration of this.

The command to move files is mv. It’s very simple and one of the first commands you will learn on the platform. Instead of just listing out the syntax and the usual switches for the command – and then allowing you to do the rest – let’s walk through how you can make use of this tool.

The mv command does one thing – it moves a file from one location to another. This can be somewhat misleading because mv is also used to rename files. How? Simple. Here’s an example. Say you have the file testfile in /home/jack/ and you want to rename it to testfile2 (while keeping it in the same location). To do this, you would use the mv command like so:

mv /home/jack/testfile /home/jack/testfile2

or, if you’re already within /home/jack:

mv testfile testfile2

The above commands would move /home/jack/testfile to /home/jack/testfile2 – effectively renaming the file. But what if you simply wanted to move the file? Say you want to keep your home directory (in this case /home/jack) free from stray files. You could move that testfile into /home/jack/Documents with the command:

mv /home/jack/testfile /home/jack/Documents/

With the above command, you have relocated the file into a new location, while retaining the original file name.

What if you have a number of files you want to move? Luckily, you don’t have to issue the mv command for every file. You can use wildcards to help you out. Here’s an example:

You have a number of .mp3 files in your ~/Downloads directory (~/ – is an easy way to represent your home directory – in our earlier example, that would be /home/jack/) and you want them in ~/Music. You could quickly move them with a single command, like so:

mv ~/Downloads/*.mp3 ~/Music/

That command would move every file that ended in .mp3 from the Downloads directory, and move them into the Music directory.

Should you want to move a file into the parent directory of the current working directory, there’s an easy way to do that. Say you have the file testfile located in ~/Downloads and you want it in your home directory. If you are currently in the ~/Downloads directory, you can move it up one folder (to ~/) like so:

mv testfile ../ 

The “../” means to move the folder up one level. If you’re buried deeper, say ~/Downloads/today/, you can still easily move that file with:

mv testfile ../../

Just remember, each “../” represents one level up.

As you can see, moving files from the command line isn’t difficult at all.

GUI

There are a lot of GUIs available for the Linux platform. On top of that, there are a lot of file managers you can use. The most popular file managers are Nautilus (GNOME) and Dolphin (KDE). Both are very powerful and flexible. I want to illustrate how files are moved using the Nautilus file manager.

Nautilus has probably the most efficient means of moving files about. Here’s how it’s done:

Open up the Nautilus file manager.Locate the file you want to move and right-click said file.From the pop-up menu (Figure 1) select the “Move To” option.When the Select Destination window opens, navigate to the new location for the file.Once you’ve located the destination folder, click Select.

This context menu also allows you to copy the file to a new location, move the file to the Trash, and more.

If you’re more of a drag and drop kind of person, fear not – Nautilus is ready to serve. Let’s say you have a file in your home directory and you want to drag it to Documents. By default, Nautilus will have a few bookmarks in the left pane of the window. You can drag the file into the Document bookmark without having to open a second Nautilus window. Simply click, hold, and drag the file from the main viewing pane to the Documents bookmark.

If, however, the destination for that file is not listed in your bookmarks (or doesn’t appear in the current main viewing pane), you’ll need to open up a second Nautilus window. Side by side, you can then drag the file from the source folder in the original window to the destination folder in the second window.

If you need to move multiple files, you’re still in luck. Similar to nearly every modern user interface, you can do a multi-select of files by holding down the Ctrl button as you click each file. After you have selected each file (Figure 2), you can either right-click one of the selected files and then choose the Move To option, or just drag and drop them into a new location.

The selected files (in this case, folders) will each be highlighted.

Moving files on the Linux desktop is incredibly easy. Either with the command line or your desktop of choice, you have numerous routes to success – all of which are user-friendly and quick to master.

The post Classic SysAdmin: How to Move Files Using Linux Commands or File Managers appeared first on Linux Foundation.